ASSRA Forum - tapered octagon barrel source?

ASSRA Forum › General › Gunsmithing Single Shot Rifles › tapered octagon barrel source?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Hot Topic (More than 10 Replies)

tapered octagon barrel source? (Read 3557 times)

JeffG Participating Member Offline Posts: 26 Joined: Dec 2^nd, 2018	tapered octagon barrel source? Aug 27^th, 2021 at 10:37am	Print Post
	I'm very green in the world of single shot rifles, so I haven't been keeping up on sources for things like octagon barrels. Are tapered octagon blanks being made by anyone? I'm looking for sources of tapered octagon blanks for a 22CF project (219 zipper, prefer fast twist; 8,9,10). But I suppose straight octagon that could be turned to half-round could be plan B Thanks for sharing Your experienced knowledge, Jeff


	IP Logged

craigster Oldtimer Offline Posts: 661 Location: lost coast CA Joined: Feb 20^th, 2011	Re: tapered octagon barrel source? Reply #1 - Aug 27^th, 2021 at 11:05am	Print Post
	I would call Douglas or PacNor.


	IP Logged

art_ruggiero Frequent Elocutionist Offline Posts: 1061 Location: CT Joined: Dec 14^th, 2008	Re: tapered octagon barrel source? Reply #2 - Aug 27^th, 2021 at 11:08am	Print Post
	try green mountain art


	IP Logged

Bulseyetom Oldtimer Offline Posts: 946 Location: Santa Maria, Ca Joined: Oct 31^st, 2010	Re: tapered octagon barrel source? Reply #3 - Aug 27^th, 2021 at 11:14am	Print Post
	I also believe CPA will taper a barrel to your specs. Tom


	Twitter IP Logged

JLouis Frequent Elocutionist Offline Posts: 10624 Joined: Apr 8^th, 2009	Re: tapered octagon barrel source? Reply #4 - Aug 27^th, 2021 at 11:15am	Print Post
	Gail at CPA is a good source and Her pricing has better than most. I have purchased several blanks from her and She will do any profile that you would like. I also highly recommend that you also get it polished unless you like doing it yourself. Her profiled and polished blanks are real Jewels and they are actually ready to be blued. One just has to keep them protected through the various machining processes. (You need to *Login* or *Register* to view media files and links)

	" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
	IP Logged

JeffG Participating Member Offline Posts: 26 Joined: Dec 2^nd, 2018	Re: tapered octagon barrel source? Reply #5 - Aug 27^th, 2021 at 1:40pm	Print Post
	Thanks for the fast replies!! Sounds like CPA is the right choice for me! I appreciate the help.


	IP Logged

Nimrod Junior Member Offline O.S.O.K. Posts: 62 Location: Eastern New Mexico Joined: Aug 8^th, 2013	Re: tapered octagon barrel source? Reply #6 - Aug 27^th, 2021 at 6:11pm	Print Post
	JeffG wrote on Aug 27^th, 2021 at 1:40pm: Thanks for the fast replies!! Sounds like CPA is the right choice for me! I appreciate the help. Before you send your money, check out BRC. Call Clay at 575-535-2923. Check out (You need to *Login* or *Register* to view media files and links)

	If you need more than one shot, you need more practice!
	IP Logged

ballardhepburnmich ASSRA Board Member Offline Posts: 598 Location: Scotts,mi. Joined: May 20^th, 2015	Re: tapered octagon barrel source? Reply #7 - Aug 28^th, 2021 at 12:56am	Print Post
	I'll second BRC barrels. Lee Gibbs pres.ASSRA


	IP Logged

rkba2nd Frequent Elocutionist Offline Posts: 1834 Location: earth Joined: Feb 16^th, 2009	Re: tapered octagon barrel source? Reply #8 - Aug 28^th, 2021 at 1:58am	Print Post
	Some octagon Green Mt. Barrels are profiled, for example, for a number three Winchester barrel, alleviating having to fit an existing forearm to the barrel. They, and others as mentioned, could possibly do the same for other makers contours. I just ordered and received a number three Winchester contour barrel from Green Mt. in 45-70, and the forearm fits like a glove.

	rkba2nd
	IP Logged

JeffG Participating Member Offline Posts: 26 Joined: Dec 2^nd, 2018	Re: tapered octagon barrel source? Reply #9 - Aug 30^th, 2021 at 3:04pm	Print Post
	Yes, more good advice, Thank You! I had come across BRC's website on a search, but had not contacted them directly. I was misjudging their low prices as old, not updated recently. They certainly have the qualifications, (and recommendations now) of experts! I don't need to match any historic profile or existing forearm inlet. This is "frame-up" custom build, and I'm the wood guy. I was hoping to find someone's "standard taper octagon", that will lean this rifle more toward sporter weight.


	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11331 Location: Why, out West of course Joined: May 29^th, 2006	Re: tapered octagon barrel source? Reply #10 - Aug 31^st, 2021 at 4:18pm	Print Post
	Krieger.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

SSShooter Frequent Elocutionist Offline Posts: 2917 Location: Southern NJ Joined: Aug 1^st, 2010	Re: tapered octagon barrel source? Reply #11 - Sep 1^st, 2021 at 11:22am	Print Post
	Bulseyetom wrote on Aug 27^th, 2021 at 11:14am: I also believe CPA will taper a barrel to your specs. Tom Yes. But, don't be in a hurry. She carries or can order Bartlein, Shilen & Douglas and will do your barrel if you are not in a hurry.

	Glenn - 2x CPA 44 1/2 w/22LR (Shilen ratchet-rifled & Bartlein 5R rifled), 38-40RH & 38-55WCF (Bartlein 5R rifled) & 40-65WCF (GrnMtn 'X') barrels
	IP Logged

Chuckster Frequent Elocutionist Offline Posts: 2203 Location: Colorado Joined: May 15^th, 2008	Re: tapered octagon barrel source? Reply #12 - Sep 1^st, 2021 at 2:35pm	Print Post
	Had BRC contour a new barrel to specs shown in a drawing. Everything fit just fine. Price more than basic but not unreasonable. Chuck


	IP Logged

oneatatime Frequent Elocutionist Offline Posts: 3758 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: tapered octagon barrel source? Reply #13 - Sep 1^st, 2021 at 6:48pm	Print Post
	Clay, at BRC, contoured two barrels to match the one that was originally on my rifle. Standard cost, at that time, was $100 per barrel for the contouring. I don't know if he does octagons.


	IP Logged

Chuckster Frequent Elocutionist Offline Posts: 2203 Location: Colorado Joined: May 15^th, 2008	Re: tapered octagon barrel source? Reply #14 - Sep 1^st, 2021 at 10:43pm	Print Post
	The one they did for me was half round octagon. Chuck


	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.5668 seconds.