ASSRA Forum › General › Gunsmithing Single Shot Rifles › scope on a stevens 25-21
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic scope on a stevens 25-21 (Read 346 times)
Capt.
Newbie
*
Offline



Posts: 3
Joined: Oct 27th, 2021
scope on a stevens 25-21
Nov 2nd, 2026 at 12:17pm
Print Post  
I have a stevens 44 1/2 with peep site in the back and a hooded thin blade in the front. MY old eyes can't really see  them. I have an extra unertil scope but the guns not tapped. Is there any real down side to having it tapped (any suggestions as to a gunsmith as I really want it right if I do it), It's a 25-21 in nice shape and I enjoy shooting it but the present sights take away from shooting it. Thanks Bill
  
Back to top
 
IP Logged
 
Capt.
Newbie
*
Offline



Posts: 3
Joined: Oct 27th, 2021
Re: scope on a stevens 25-21
Reply #1 - Nov 3rd, 2026 at 5:25am
Print Post  
After a few pm's I've decided to not tap the barrel. I'm not to concerned over loss of value but more about the gun surviving all these years basically untouched. So no scope, on the upside I'll just need to shoot it more to try and get used to the sights. Thanks Bill
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4594
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: scope on a stevens 25-21
Reply #2 - Nov 3rd, 2026 at 12:53pm
Print Post  
No sweat, remember the barrels are easily changed. Get another barrel and put a scope on it or find one that is already tapped. I have 4 barrels for mine.
  
Back to top
 
IP Logged
 
gnoahhh
Frequent Elocutionist
*****
Offline



Posts: 1191
Location: Gaithersburg, MD
Joined: Mar 31st, 2010
Re: scope on a stevens 25-21
Reply #3 - Nov 3rd, 2026 at 12:59pm
Print Post  
A new front sight adaptable to your eyes/demeanor is also another option. If it's an original old Stevens barrel it's likely that the sight dovetail is larger than the modern norm of 3/8", so that may pose a hurdle to overcome.
  
Back to top
 
IP Logged
 
Capt.
Newbie
*
Offline



Posts: 3
Joined: Oct 27th, 2021
Re: scope on a stevens 25-21
Reply #4 - yesterday at 3:15pm
Print Post  
I really like the gun although I  really shoot it poorly with the sights on it. That said I'm going to leave it as it is try shooting it once in a while and except my old eyes just don't like the sights
  
Back to top
 
IP Logged
 
Sure shot
Frequent Elocutionist
*****
Offline



Posts: 1247
Location: East central Iowa
Joined: Jun 22nd, 2020
Re: scope on a stevens 25-21
Reply #5 - yesterday at 4:17pm
Print Post  
Look for a full length Stevens favorite scope, the mounts fit into the front and rear sight dovetails.
  
Back to top
 
IP Logged
 
Jonathan
Full Member
***
Offline



Posts: 213
Location: THE GOOD PART OF NY
Joined: Sep 5th, 2025
Re: scope on a stevens 25-21
Reply #6 - yesterday at 5:47pm
Print Post  
I have the same problem and that is why most of my rifles have scopes. One of mine however is a 44 in 32/20 and it is in 90% condition and I could not bring myself to drill and tap it. What I did was to install a fiber optic front sight using brass shim stock to fill the oversize dovetail and use a very open disc with the tang sight. Even with my less than perfect eyesight this combination shows up really well and allows me to shoot well out to 100 yds.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6111 seconds.