ASSRA Forum › General › Gunsmithing Single Shot Rifles › Sharpening dull cutters
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Sharpening dull cutters (Read 276 times)
KFW
Oldtimer
*****
Online



Posts: 656
Location: Wyoming
Joined: Dec 18th, 2016
Sharpening dull cutters
Oct 24th, 2026 at 11:00am
Print Post  
Anyone try 75% industrial vinegar to sharpen up dull checkering cutters and rifflers? I read somewhere that it could be used with some success instead of throwing them out. Now that Dembart is gone I would like to give it a try. 75% is a pretty strong solution to start with, so a dilution on 1st try maybe the way to start?
  
Back to top
 
IP Logged
 
ssdave
Frequent Elocutionist
*****
Offline



Posts: 2203
Location: Eastern Oregon
Joined: Apr 16th, 2004
Re: Sharpening dull cutters
Reply #1 - Oct 24th, 2026 at 11:51am
Print Post  
Boggs tools can probably resharpen them, their business is sharpening files.  They do it with abrasive steam blasting.  I've posted on here before the results, and they were good.

However, their website is showing up as lapsed.  I hope they're not out of business!

  
Back to top
 
IP Logged
 
KensBullard
Junior Member
**
Offline



Posts: 89
Location: Woodland Wa
Joined: Dec 17th, 2024
Re: Sharpening dull cutters
Reply #2 - Oct 24th, 2026 at 12:27pm
Print Post  
there was a video I found on them and all the guys there where all on the old side
  
Back to top
 
IP Logged
 
Chuckster
Frequent Elocutionist
*****
Offline



Posts: 2330
Location: Colorado
Joined: May 15th, 2008
Re: Sharpening dull cutters
Reply #3 - Oct 24th, 2026 at 1:02pm
Print Post  
Have had some luck sharpening files with ordinary household vinegar. Takes a while, several hours.
Results were not as good as new but better than it was.
Should work on checkering cutters but no miracles.
Chuck
  
Back to top
 
IP Logged
 
CW
Oldtimer
*****
Offline



Posts: 555
Joined: Feb 20th, 2018
Re: Sharpening dull cutters
Reply #4 - Oct 24th, 2026 at 1:04pm
Print Post  
Boggs is still there and taking work as of this last week. I just talked to them.

Address: 14100 Orange Ave, Paramount, CA 90723
Phone: (562) 634-1081
Hours: Closed · Opens 7:30 AM Mon
  
Back to top
 
IP Logged
 
KensBullard
Junior Member
**
Offline



Posts: 89
Location: Woodland Wa
Joined: Dec 17th, 2024
Re: Sharpening dull cutters
Reply #5 - Oct 24th, 2026 at 2:45pm
Print Post  
(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.0889 seconds.