ASSRA Forum › General › Single Shot Rifles › Ballard questions
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 ... 4 5 [6]  Send TopicPrint
Very Hot Topic (More than 25 Replies) Ballard questions (Read 5812 times)
texasmac
Frequent Elocutionist
*****
Offline



Posts: 2076
Location: Central Texas
Joined: Aug 16th, 2004
Re: Ballard questions
Reply #75 - Oct 6th, 2025 at 10:28am
Print Post  
DWT1885 wrote on Oct 6th, 2025 at 9:41am:
You might want to wait till you get your Ballard and first slug the bore before making up loaded rounds. I put the cart before the horse and made up rounds before getting my 32-40 Ballard. Well, I got .321 bullets and then found out my groove dia. was .323. Just something to think about.


With a new-to-me rifle I always make a chamber cast including a portion of the bore & slug the bore prior to loading ammo.  I also keep the cast & slug or fully document all the dimensions for future reference.

Wayne
  
Back to top
 
IP Logged
 
Schutzenbob
Frequent Elocutionist
*****
Offline


Rheinisch-Westfälisc
hen Sprengstoff-Fabriken

Posts: 2185
Location: Nightingale, California
Joined: Oct 24th, 2005
Re: Ballard questions
Reply #76 - Oct 6th, 2025 at 2:13pm
Print Post  
Randy Wright has some good "how to" books for single shots. You might want to buy one. 
« Last Edit: Oct 6th, 2025 at 7:11pm by Schutzenbob »  
Back to top
 
IP Logged
 
Old Soldier
Senior Forum Member
****
Offline



Posts: 309
Location: North Pole, Alaska
Joined: Oct 17th, 2015
Re: Ballard questions
Reply #77 - Oct 6th, 2025 at 2:34pm
Print Post  
Good advice from all. Thank you
  
"White man have very strong Medicine. Shoot today maybeso kill you tomorrow." Esa-Tai Commanche warrior
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 17212
Location: Oregon
Joined: Feb 2nd, 2009
Re: Ballard questions
Reply #78 - Oct 6th, 2025 at 2:55pm
Print Post  
If it is a #4 action with matching serial number barrel it will be forged. I still check all Ballard rifles as I've been offered some to buy that had all the features of a forged action, but once I dropped the block and checked under the chamber end they proved to be cast. There are always exceptions to any rule, so best to be sure.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 ... 4 5 [6] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6250 seconds.