ASSRA Forum › General › Reloading the Single Shot Rifle › lead bullet jump
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic lead bullet jump (Read 189 times)
John Schluter
Junior Member
**
Offline



Posts: 66
Location: Fredericksburg, TX
Joined: Mar 4th, 2013
lead bullet jump
Sep 2nd, 2024 at 6:12pm
Print Post  
I've used some downtime to reload for my 243 Win. This involved carefully controlling the bullet jump to the lands. This got me to thinking (despite the pain it caused). I've read very little on the subject of bullet jump with lead bullets. Is this because it's been deemed a non-issue or, possibly it's too barrel/gun specific. It's discussed routinely in the jacketed bullet crowd, but I find VERY few mentions in the cast bullet users. Why?
  
Back to top
 
IP Logged
 
RSW
Frequent Elocutionist
*****
Offline



Posts: 1193
Location: Arizona
Joined: Sep 8th, 2006
Re: lead bullet jump
Reply #1 - Sep 2nd, 2024 at 6:33pm
Print Post  
Bullet jump is a HUGE factor in cast bullet shooting  Smiley Whether breech seated or fixed ammo, bullet jump (or lack thereof) is a significant factor. Cast bullet fixed ammo can have the bullet backed off the rifling a thou or so, or have the front bearing band engaged with the rifling. Beech seating on the other hand is fully engaged in the rifling but the precise depth plays a real role in achieving the best accuracy.
  
Randy W
ASSRA 10211  -  ISSA 125
There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
Back to top
WWW  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.3458 seconds.