ASSRA Forum - Another rabbit hole...

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Another rabbit hole...

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

Another rabbit hole... (Read 768 times)

jhm Frequent Elocutionist Offline Posts: 1231 Location: georgia Joined: Sep 4^th, 2011	Another rabbit hole... Apr 17^th, 2024 at 8:53pm	Print Post
	I recently purchased a Borchardt "kit" from a friend that Rodney Storie did many years ago. Castings are of good quality with a bit of welding to correct a couple flaws. It is partially machined and already threaded for the barrel which is good. My problem is I need a good set of working drawings as I don't have access to an original. Anyone know of a source? JMH


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 15735 Location: Oregon Joined: Feb 2^nd, 2009	Re: Another rabbit hole... Reply #1 - Apr 18^th, 2024 at 10:30am	Print Post
	I believe the ASSRA archives might have drawings for some old single shots. Might check there to see if they have what you want?

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

bobw Frequent Elocutionist Offline Posts: 1300 Location: NW, Iowa Joined: Mar 19^th, 2013	Re: Another rabbit hole... Reply #2 - Apr 18^th, 2024 at 12:33pm	Print Post
	marlinguy wrote on Apr 18^th, 2024 at 10:30am: I believe the ASSRA archives might have drawings for some old single shots. Might check there to see if they have what you want? They do have the Borchardt.

	Robert Warren
	IP Logged

idjeffp Senior Forum Member Offline Posts: 269 Location: Boise, ID Joined: Nov 11^th, 2017	Re: Another rabbit hole... Reply #3 - Apr 18^th, 2024 at 2:04pm	Print Post
	I took my prints and scaled them up and printed on 11x17" paper. Easier to read... Got my Borchardt .50-90 SS rebarrel ready to test fire now. Making some new extractors and fitting one was fun JP


	IP Logged

jfeldman ASSRA Board Member Offline Posts: 1060 Location: Imperial Beach, Ca Joined: Nov 5^th, 2005	Re: Another rabbit hole... Reply #4 - Apr 20^th, 2024 at 6:17pm	Print Post
	jhm, I finally found where I'd stashed my big prints from Moeller but they are big - 30" by 40" or thereabouts. I could probably take pics of individual parts that you might need and send them along or post them here... Regards, Joe


	IP Logged

guilty gil Participating Member Offline Posts: 28 Location: Livingston mt. Joined: Feb 5^th, 2021	Re: Another rabbit hole... Reply #5 - Apr 20^th, 2024 at 6:27pm	Print Post
	I vote print them here for all of us.thanks!


	IP Logged

fallingblock ASSRA Board Member Online Posts: 630 Location: Wisconsin Joined: Apr 16^th, 2004	Re: Another rabbit hole... Reply #6 - Apr 20^th, 2024 at 9:32pm	Print Post
	The prints are $15.00 post paid from the Archives. The sale of the prints helps keep the Archives open. Cheers, Laurie ASSRA Archivist.

	Cheers, Laurie ASSRA Secretary & Archivist
	IP Logged

jfeldman ASSRA Board Member Offline Posts: 1060 Location: Imperial Beach, Ca Joined: Nov 5^th, 2005	Re: Another rabbit hole... Reply #7 - Apr 20^th, 2024 at 11:37pm	Print Post
	Here's some pictures of the Borchardt action cutaway that I found helpful when I was working on my kit. I was also loaned an action by our Schützenmeister and could take measurements from it as well - a huge help. Thanks Eric! Regards, Joe P.S. Thanks for the reminder Laurie. $15 dollars is well spent and supports the organisation.


	IP Logged

idjeffp Senior Forum Member Offline Posts: 269 Location: Boise, ID Joined: Nov 11^th, 2017	Re: Another rabbit hole... Reply #8 - Apr 21^st, 2024 at 2:30pm	Print Post
	Thanks for sharing that JFeldman... reminded me that I should probably add a radius to the upper end of the extractor that meshes with the cocking plate on that right-hand side. Saving these picts off for reference... Where does this Borchardt cutaway reside these days? Is it at the Cody Museum by chance? Cheers, Jeff Pfeifer
	« Last Edit: Apr 22^nd, 2024 at 4:35pm by idjeffp »

	IP Logged

jhm Frequent Elocutionist Offline Posts: 1231 Location: georgia Joined: Sep 4^th, 2011	Re: Another rabbit hole... Reply #9 - Apr 21^st, 2024 at 3:16pm	Print Post
	Pictures are worth a thousand words... Thank you very much. This will be a great help. JMH


	IP Logged

jfeldman ASSRA Board Member Offline Posts: 1060 Location: Imperial Beach, Ca Joined: Nov 5^th, 2005	Re: Another rabbit hole... Reply #10 - Apr 21^st, 2024 at 8:06pm	Print Post
	Jeff, I have no idea where it resides these days. I'm not positive but I think it was in an auction several years ago. Regards, Joe


	IP Logged

jhm Frequent Elocutionist Offline Posts: 1231 Location: georgia Joined: Sep 4^th, 2011	Re: Another rabbit hole... Reply #11 - Apr 22^nd, 2024 at 8:40pm	Print Post
	Another question and that is the upper tang is supposed to be held on with a screw? My action someone has welded the tang with the rear tang sight mount on it. It was not done very well but I can machine it out and make one more suited. Could someone possibly post a photo of the screwed on tang action? Thanks... JMH


	IP Logged

Schutzenbob Frequent Elocutionist Online Rheinisch-Westfälisc hen Sprengstoff-Fabriken Posts: 1967 Location: Nightingale, California Joined: Oct 24^th, 2005	Re: Another rabbit hole... Reply #12 - Apr 22^nd, 2024 at 10:12pm	Print Post
	Borchart tang and sight


	IP Logged

jhm Frequent Elocutionist Offline Posts: 1231 Location: georgia Joined: Sep 4^th, 2011	Re: Another rabbit hole... Reply #13 - Apr 22^nd, 2024 at 11:34pm	Print Post
	Thank you Mr. Schutzenbob! As stated whoever installed and welded the present one didn't do a very good job so I am going to remove it and slightly clean up the width and make one that will be the screw on type. Thanks again... JMH


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.0629 seconds.