ASSRA Forum - Screw thread size for Sharps forearm

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Screw thread size for Sharps forearm

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Screw thread size for Sharps forearm (Read 295 times)

Chris W Junior Member Offline Posts: 85 Joined: Sep 14^th, 2020	Screw thread size for Sharps forearm Mar 25^th, 2024 at 1:06pm	Print Post
	Does anyone happen to know what size the screw thread is on a Shiloh Sharps forearm, I need to get a couple longer ones to hold a forearm in place while I shape it. Thanks Chris


	IP Logged

bobw Frequent Elocutionist Offline Posts: 1303 Location: NW, Iowa Joined: Mar 19^th, 2013	Re: Screw thread size for Sharps forearm Reply #1 - Mar 25^th, 2024 at 7:40pm	Print Post
	Mine measures .190-28 so 10-28. Bob

	Robert Warren
	IP Logged

Chris W Junior Member Offline Posts: 85 Joined: Sep 14^th, 2020	Re: Screw thread size for Sharps forearm Reply #2 - Mar 27^th, 2024 at 4:05pm	Print Post
	Kirk over on Shiloh forums answered me and it is indeed 10-28, my problem now is finding a 10-28 screw thats longer like 1.5 or 1.75 for what I'm wanting to do. Googled it and found some in some airplane sights but they are rather expensive and I really just need two. I'll figure it out!


	IP Logged

SBoomer Oldtimer Offline Posts: 879 Location: Michigan's Frozen North (U.P.) Joined: Jan 28^th, 2010	Re: Screw thread size for Sharps forearm Reply #3 - Mar 27^th, 2024 at 4:58pm	Print Post
	AN-3 aircraft are 10-32. AN-4 aircraft are 1/4-28. Ive never run across a 10-28 in aircraft….double check before you order.


	IP Logged

Chris W Junior Member Offline Posts: 85 Joined: Sep 14^th, 2020	Re: Screw thread size for Sharps forearm Reply #4 - Mar 28^th, 2024 at 10:35am	Print Post
	I wasn't going to order because of price but thanks for letting me know.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.1071 seconds.