ASSRA Forum › General › Gunsmithing Single Shot Rifles › Barrel Liners
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) Barrel Liners (Read 3179 times)
.22Hepburn
Oldtimer
*****
Offline



Posts: 844
Location: Pennsylvania
Joined: Feb 18th, 2008
Re: Barrel Liners
Reply #15 - Nov 20th, 2021 at 12:39pm
Print Post  
Mike Bassett does excellent work. I’ve had him do several re- line jobs. You might consider going with a Redmond liner. I have several that shoot very well. You can reach Mike at 405-315-0590.
  
Back to top
Facebook  
IP Logged
 
beltfed
Frequent Elocutionist
*****
Offline



Posts: 1826
Location: Central Wi
Joined: Dec 20th, 2007
Re: Barrel Liners
Reply #16 - Nov 20th, 2021 at 1:48pm
Print Post  
"Lining Yourself"
Besides the mentioned Brownells liner drill, Liner and acraglas to glue it in
you will need to be able to face off and crown it at the muzzle
face it off at the breech, and then finally chamber it-Brownells also has 22 reamers.
Really should need a lathe. 
(I bought a Bentz match 22 reamer-worked well and resulted in a very accurate lined Stevens TipUp and a great shooting and functioning barrel setback rework on a Ruger 10/22 Sporter. )
beltfed/arnie
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.4767 seconds.