ASSRA Forum › General › Gunsmithing Single Shot Rifles › parker hale barrel
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic parker hale barrel (Read 1209 times)
57thahc
Full Member
***
Offline



Posts: 175
Location: Hillsdale Mi.
Joined: Dec 29th, 2007
parker hale barrel
Apr 1st, 2018 at 4:24pm
Print Post  
I bought a Parker Hale barrel;34" 10 groove 50 cal;roto hammered.It has a rimless extractor. My gunsmiths (I need 2)
say it an excellent quality barrel. The problem is a one in 32 twist,SLOW,both smiths liken it to a muzzle loader.Sounds reasonable,I would like to shoot BP and breech seat. My action 
is a Wycliffe, a HD action,I do want to shoot it as a bench rest.
Any info ,comments  Roll Eyes Cheesy I all ways do obtuse projects.
    Dick Stack57ahc
  
Turned in my M60 for a Martini!
Back to top
 
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1151
Location: CT
Joined: Dec 14th, 2008
Re: parker hale barrel
Reply #1 - Apr 1st, 2018 at 5:14pm
Print Post  
that is the original twist on 50/70.  shoot it with a 450   480 grain bullet and black powder   have some fun   art
  
Back to top
 
IP Logged
 
57thahc
Full Member
***
Offline



Posts: 175
Location: Hillsdale Mi.
Joined: Dec 29th, 2007
Re: parker hale barrel
Reply #2 - Apr 1st, 2018 at 11:46pm
Print Post  
ART: Thanks of the info! I was hoping to do 50-70.Gives me some solid ground to continue. I will try to remit the progress
on this project.Dick Stack57thahc
  
Turned in my M60 for a Martini!
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5210 seconds.