Page Index Toggle Pages: 1 2 3 [4] 5  Send TopicPrint
Very Hot Topic (More than 25 Replies) Introduction and a Stevens - UPDATE got it (Read 31799 times)
AZshot
Full Member
***
Offline



Posts: 193
Location: Desert Southwest
Joined: Nov 29th, 2016
Re: Introduction and a Stevens - UPDATE got it
Reply #45 - Dec 11th, 2016 at 10:20am
Print Post  
Redsetter, could you explain the proper way to handle this action?  I've been going to full cock on the hammer, then opening the block.  Because when I'm at "hammer down" or half cock, I can see the hammer start to move, and hear a few clicks, when starting to lower the lever.  That's why I was asking, are these meant to self cock?  Or go to half cock when opened?  I just don't want to break it, and it seems from full cock it's opening smoother with fewer internal "noises".  The lever and action seems fine, it's held up nice and snug when closed and all.  Just want to learn the "course of fire" for these before range day (today)!
  
Back to top
 
IP Logged
 
RSW
Frequent Elocutionist
*****
Offline



Posts: 1196
Location: Arizona
Joined: Sep 8th, 2006
Re: Introduction and a Stevens - UPDATE got it
Reply #46 - Dec 11th, 2016 at 10:27am
Print Post  
AZshot
That's a really nice rifle you have acquired.
If you are located in Az, we have a small but active Schuetzen Verein that meets at Ben Avery Shooting Facility (BASF) north of Phoenix.
On Dec 17 we will have an all day practice session at the BASF bench rest range. There should be several of our guys shooting 22RF. You and your new rifle will fit right in with with our group.
You are welcome (as is anyone) to come out and join us. Email or PM me and I can provide more details and 2017 schedule.
« Last Edit: Dec 11th, 2016 at 10:35am by RSW »  

Randy W
ASSRA 10211  -  ISSA 125
There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
Back to top
WWW  
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16278
Location: Oregon
Joined: Feb 2nd, 2009
Re: Introduction and a Stevens
Reply #47 - Dec 11th, 2016 at 10:38am
Print Post  
Redsetter wrote on Dec 10th, 2016 at 7:16pm:
[quote author=262A392722252C3E324B0 link=1481048312/36#36 date=1481410708]

You've been grossly mislead (perhaps by some of the malarkey about Stevens made up out of whole cloth by John Campbell?). .


I'm uncertain how I've been grossly mislead? Prior to Stevens purchase of Cataract they did indeed purchase scopes from Cataract. Since they offered scopes long before they purchased Cataract, I can't see how those scopes simply appeared in their catalog without Cataract or someone else making  them.
As for the mounts from Malcolm, I have no idea how they ended up on my Stevens scope, since over 100 years anything could  happen. I wasn't saying they came from Stevens with Malcom mounts, but Stevens did offer both Malcolm made scopes and their mounts prior to having their own scope business.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16278
Location: Oregon
Joined: Feb 2nd, 2009
Re: Introduction and a Stevens - UPDATE got it
Reply #48 - Dec 11th, 2016 at 10:48am
Print Post  
That's a gorgeous Stevens you've purchased AZshot! The condition is fantastic, and having scope and two barrels is great! Not many Stevens built with single set triggers, so that's an unusual option on your gun! 
Of course you could shoot it in competition, but it is always a risk of a bump or ding every time you take a  gun out, so "rigorous" competitive shooting just means you're going to be shooting it a lot, so more chances to bump it.
I always lower the block with the hammer down. Not sure it matters on a Stevens, but it's safer to raise the block on a live round with the hammer down.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Redsetter
Frequent Elocutionist
*****
Offline



Posts: 3468
Location: New York
Joined: Aug 6th, 2013
Re: Introduction and a Stevens
Reply #49 - Dec 11th, 2016 at 11:29am
Print Post  
marlinguy wrote on Dec 11th, 2016 at 10:38am:


I'm uncertain how I've been grossly mislead? Prior to Stevens purchase of Cataract they did indeed purchase scopes from Cataract.


Of course--any perusal of an early Stevens catalog will document that fact; but that (to refresh your memory) was not what you previously SAID: "Most the early Stevens were built by others. Cataract or Malcolm, so they used their mounts."

Am I wrong to infer a considerable difference between "built by" and "purchase from"?
  
Back to top
 
IP Logged
 
Redsetter
Frequent Elocutionist
*****
Offline



Posts: 3468
Location: New York
Joined: Aug 6th, 2013
Re: Introduction and a Stevens - UPDATE got it
Reply #50 - Dec 11th, 2016 at 11:39am
Print Post  
marlinguy wrote on Dec 11th, 2016 at 10:48am:

Of course you could shoot it in competition, but it is always a risk of a bump or ding every time you take a  gun out, so "rigorous" competitive shooting just means you're going to be shooting it a lot, so more chances to bump it.


This is the danger--you're distracted by the commotion going on all around you, and none of the crowd at such an event are going to be looking out for your gun.

About 30 yrs ago I traveled to a BP silhouette competition thinking it might be something I'd like to do with one of my precious original Ballards; five minutes observation of the dust clouds produced as shooters shook out their shooting mats, along with the general commotion, was all needed to see to convince me otherwise!
  
Back to top
 
IP Logged
 
AZshot
Full Member
***
Offline



Posts: 193
Location: Desert Southwest
Joined: Nov 29th, 2016
Re: Introduction and a Stevens - UPDATE got it
Reply #51 - Dec 11th, 2016 at 12:02pm
Print Post  
Hmm, when I shot at the BPCR matches in Raton, it was very calm and collected.  Many people were shooting custom Ballards, Hepburns, and such, with custom AAA grade wood and fantastic finishes.  Some original, some customs by Ron Long, Steve Garbe, and all those before anyone every heard of "Turnbull."  I never saw it later if it became chaotic, this was back in the 1990s, when only about 300 people would shoot the Nationals. 
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16278
Location: Oregon
Joined: Feb 2nd, 2009
Re: Introduction and a Stevens
Reply #52 - Dec 11th, 2016 at 12:32pm
Print Post  
Redsetter wrote on Dec 11th, 2016 at 11:29am:
marlinguy wrote on Dec 11th, 2016 at 10:38am:


I'm uncertain how I've been grossly mislead? Prior to Stevens purchase of Cataract they did indeed purchase scopes from Cataract.


Of course--any perusal of an early Stevens catalog will document that fact; but that (to refresh your memory) was not what you previously SAID: "Most the early Stevens were built by others. Cataract or Malcolm, so they used their mounts."

Am I wrong to infer a considerable difference between "built by" and "purchase from"?


My mistake. I meant to say most of the early scopes offered by Stevens were Cataract or Malcom.  Sorry I miss typed that, which appeared like I meant they were Stevens marked. wasn't what I was trying to infer.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16278
Location: Oregon
Joined: Feb 2nd, 2009
Re: Introduction and a Stevens - UPDATE got it
Reply #53 - Dec 11th, 2016 at 12:38pm
Print Post  
AZshot wrote on Dec 11th, 2016 at 12:02pm:
Hmm, when I shot at the BPCR matches in Raton, it was very calm and collected.  Many people were shooting custom Ballards, Hepburns, and such, with custom AAA grade wood and fantastic finishes.  Some original, some customs by Ron Long, Steve Garbe, and all those before anyone every heard of "Turnbull."  I never saw it later if it became chaotic, this was back in the 1990s, when only about 300 people would shoot the Nationals. 


Like anything else, what someone chooses to do with their collectible guns is their choice. I have people tell me I'm crazy to hunt with my old Ballard rifles, as I could fall and damage one. I choose to take that chance, as I want to enjoy mine as they were intended. I have no problem hunting, or competing with a nice old original, and not trying to discourage you either. Just telling you that it does open up the possibility of bumps and dings. 
I'm pretty sure all of my old Ballards have been shot often by previous owners, so my doing the same is OK by me.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Rebel
Frequent Elocutionist
*****
Offline



Posts: 4292
Location: Rockets and Race Cars
Joined: Mar 9th, 2015
Re: Introduction and a Stevens - UPDATE got it
Reply #54 - Dec 11th, 2016 at 1:46pm
Print Post  
I agree with Vall.
It's the same for people who restore old cars to better than original and trailer them to shows, take them home and wash and wax everything including the chassis.
The rifles are meant to be shot and the cars to be driven.
More power to you if you just collect and never shoot, I don't shoot much myself.
But it's not because I'm afraid to use my best rifle, where's the fun in that?
Aaron
  

WARNING: This post may contain material offensive to those who lack wit, humor, common sense and supporting factual or anecdotal evidence. Let's Go Sonny!
Back to top
 
IP Logged
 
calledflyer
Frequent Elocutionist
*****
Offline



Posts: 3588
Joined: Mar 9th, 2015
Re: Introduction and a Stevens - UPDATE got it
Reply #55 - Dec 11th, 2016 at 1:50pm
Print Post  
If you plan to shoot it, leave the scope it has now- it's better than the older ones anyhow, and might have been added as an update while the gun was still in ordinary use. 
The gun in the field never bothered me. I've taken valuable rifles hunting and always to the range. It's what they're for, ain't it?
Finally, you sure got a nice one there. Merry Christmas.
  
Back to top
 
IP Logged
 
Redsetter
Frequent Elocutionist
*****
Offline



Posts: 3468
Location: New York
Joined: Aug 6th, 2013
Re: Introduction and a Stevens - UPDATE got it
Reply #56 - Dec 11th, 2016 at 1:58pm
Print Post  
AZshot wrote on Dec 11th, 2016 at 12:02pm:
Hmm, when I shot at the BPCR matches in Raton, it was very calm and collected.  Many people were shooting custom Ballards, Hepburns, and such, with custom AAA grade wood and fantastic finishes.  Some original, some customs by Ron Long, Steve Garbe, and all those before anyone every heard of "Turnbull." 


New $5000 guns, or originals that have been "customized," or originals in beater condition...no problem.  But a very rare gun in apparently immaculate condition is quite a different proposition, I think.

Hunting in good terrain (not scaling cliffs, for ex.) in good weather (i.e., not in a rain or snow storm) is far less hazardous, I think, because there are no other people around to distract you, like the guy who started talking to me while I was loading my boat at a public boat launch, causing me to go off and leave a $1000 bamboo rod that was gone when I went back to look for it.  I've hunted with many of my prized antique guns, though none of them, I have to say, in such beautiful condition as your Stevens.

I remember Doug from the time he'd rent one or two tables to display his work at the formerly great Syracuse show, where many fine SSs showed up...30+ yrs ago!  Had a feeling that lad was going places!

  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16278
Location: Oregon
Joined: Feb 2nd, 2009
Re: Introduction and a Stevens - UPDATE got it
Reply #57 - Dec 11th, 2016 at 3:27pm
Print Post  
For me the only difference in whether I shoot, hunt, or use a gun, is it's condition. Even the most pristine and rare guns I own get shot and occasionally hunted with. But I wont take one of the nicest out in inclement weather, when I can grab one that's less valuable.
As Aaron said, it's the same for my old cars. I have one I wont drive in nasty weather, but the others are all fair game in anything but ice or snow.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
AZshot
Full Member
***
Offline



Posts: 193
Location: Desert Southwest
Joined: Nov 29th, 2016
Re: Introduction and a Stevens - UPDATE got it
Reply #58 - Dec 11th, 2016 at 4:26pm
Print Post  
Well, shooting it is a done deal.  My daughter and I just got back from the range, where we had quite a good time shooting this old beauty.  The set trigger is nice, not too light, perhaps a pound or two.  The first two shots were almost on top of each other, but at short range to check the scope.  It was close enough, so I shot the rest of the time at 50 yards.  It seems very accurate, but there was a coming and going cross breeze.  About 1.2" groups.  

My 22 year old daughter seems to have shot better than me.

(You need to Login or Register to view media files and links)
(You need to Login or Register to view media files and links)
« Last Edit: Dec 11th, 2016 at 5:05pm by AZshot »  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 16278
Location: Oregon
Joined: Feb 2nd, 2009
Re: Introduction and a Stevens - UPDATE got it
Reply #59 - Dec 11th, 2016 at 7:57pm
Print Post  
Sure looks like a keeper AZshot! I'd probably leave that scope on it myself, as it's a much better choice (if you plan to shoot it) than any other scope would be.
  

(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 2 3 [4] 5 
Send TopicPrint