ASSRA Forum - new here...need bsa 12/15 info

ASSRA Forum › General › Single Shot Rifles › new here...need bsa 12/15 info

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

new here...need bsa 12/15 info (Read 2013 times)

oldschool69 Ex Member	new here...need bsa 12/15 info Jan 24^th, 2016 at 8:35pm	Print Post
	how is the trigger pull weight and does this rifle have the strong ejection like the bsa mk2....thanks


	IP Logged

Singleshotlover Oldtimer Offline Posts: 625 Location: New Iberia,Louisiana Joined: Jun 11^th, 2006	Re: new here...need bsa 12/15 info Reply #1 - Jan 25^th, 2016 at 1:31am	Print Post
	I have about a 2.5 pound trigger pull on my model 12/15 and extraction is basically open the lever and out pops the case. That is basically it. Course if you really snap open the lever the case usually clears the action. Frank

	Singleshotlover
	IP Logged

gewehrfreund Senior Forum Member Offline Posts: 435 Location: Cortland Joined: Jan 24^th, 2005	Re: new here...need bsa 12/15 info Reply #2 - Jan 25^th, 2016 at 8:13am	Print Post
	A 12/15 is not a MKII or even really comparable. The triggers are not adjustable, but can be worked to a very nice letoff. They are club guns, not serious target rifles, but like almost all small frame Martinis, they are very accurate. The design is such that by smartly opening the action, the spent case will clear the rifle with ease.


	IP Logged

oldschool69 Ex Member	Re: new here...need bsa 12/15 info Reply #3 - Jan 25^th, 2016 at 9:38am	Print Post
	thanks guys...sounds like it is the same as my vickers empire where you have to kind of snap the lever to get a full ejection of the brass


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.7745 seconds.