ASSRA Forum - .22 K-Hornet re-chamber

ASSRA Forum › General › Gunsmithing Single Shot Rifles › .22 K-Hornet re-chamber

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

.22 K-Hornet re-chamber (Read 6053 times)

OLReliable Full Member Offline Posts: 209 Location: New England Joined: Jul 14^th, 2004	.22 K-Hornet re-chamber Sep 27^th, 2015 at 5:48pm	Print Post
	Sorry, not single shot related, but .... I'm looking for a gunsmith who will re-chamber my Savage 23D rifle from .22 Hornet to .22 K-Hornet. Please reply here just in case another poster/member needs this job done too. T.I.A. Gary

	OLR wyyyyyyy iiiyyyyyy awwwttta ......
	IP Logged

FITZ Oldtimer Offline REGARDS Posts: 917 Location: MASSACHUSETTS Joined: Apr 16^th, 2004	Re: .22 K-Hornet re-chamber Reply #1 - Sep 27^th, 2015 at 6:39pm	Print Post
	One of my earliest efforts at Rifle building Single Shots was a Winchester Lowall. I built a .22 Hornet. Took a while to find a good Mold that would shoot well, 225418 48 Grs Memory ?? I got it shooting very well with 9.5 Grs 2400. Then I was exposed to the K Hornet. So Borrowed the Chamber Reamer and chambered my Rifle to K and guess what? The best shooting load was still 9.5 Grs 2400 so I gained nothing. that was 30 years ago and I still own that rifle. Do not shoot it much and someday if I find a really nice original Lowall Barrel in 25-20 SS or 32-20 guess what it will become? HTH Regards, FITZ

	FITZ
	IP Logged

OLReliable Full Member Offline Posts: 209 Location: New England Joined: Jul 14^th, 2004	Re: .22 K-Hornet re-chamber Reply #2 - Sep 27^th, 2015 at 7:10pm	Print Post
	Thanks FITZ. We both know, tho, that "leaving well enough alone" is not always in our Grand Plan But, your suggestion is a good one.

	OLR wyyyyyyy iiiyyyyyy awwwttta ......
	IP Logged

l h jenkins Participating Member Offline Posts: 13 Joined: May 5^th, 2012	Re: .22 K-Hornet re-chamber Reply #3 - Sep 27^th, 2015 at 9:11pm	Print Post
	going to k hornet has advantageous. head space off shoulder, not rim, less brass stretch. I have done three and do not regret any. others have different thoughts. ymmv. I also have a pair of k hornets in 17 with 35 degree shoulder.


	IP Logged

Dr Tom Ex Member	Re: .22 K-Hornet re-chamber Reply #4 - Sep 27^th, 2015 at 9:44pm	Print Post
	Was it Ackley who said that having less taper in the case walls reduces bolt head thrust? If so, the K Hornet might be a good choice for a weaker action. Please correct me if I've mis-remembered this. It's been 20 years or more since I read his books.


	IP Logged

OLReliable Full Member Offline Posts: 209 Location: New England Joined: Jul 14^th, 2004	Re: .22 K-Hornet re-chamber Reply #5 - Sep 27^th, 2015 at 10:07pm	Print Post
	I see the .22 K-Hornet to be more virtuous than its parent. But going back to the original request: who can cut a chamber for me?

	OLR wyyyyyyy iiiyyyyyy awwwttta ......
	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: .22 K-Hornet re-chamber Reply #6 - Sep 27^th, 2015 at 10:08pm	Print Post
	l h jenkins wrote on Sep 27^th, 2015 at 9:11pm: going to k hornet has advantageous. head space off shoulder, not rim, less brass stretch. I have done three and do not regret any. others have different thoughts. ymmv. I also have a pair of k hornets in 17 with 35 degree shoulder. Same experience. A Contender pistol would eat up standard shape brass in 3 firings, sometimes on the first firing. Converting to "K" allowed me to headspace it on the shoulder, and brass now lasts a lot longer. How much? I don't know, since I haven't had a head separation since, after 6 or 7 firings. To the O.P. - rent a reamer and do it yourself. It's the easiest rechamber job I know of. Can be done free-hand if you've got a steady grip and can detach the barrel, which isn't too hard on a Model 23.
	« Last Edit: Sep 27^th, 2015 at 10:17pm by uscra112 »
	<div class=
	IP Logged

Dr Tom Ex Member	Re: .22 K-Hornet re-chamber Reply #7 - Sep 28^th, 2015 at 12:45am	Print Post
	If I recall the 23D correctly you may need an extension rod to get the reamer into position.


	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: .22 K-Hornet re-chamber Reply #8 - Sep 28^th, 2015 at 1:30am	Print Post
	Quote: If I recall the 23D correctly you may need an extension rod to get the reamer into position. Loosen the barrel nut, then unscrew the barrel. The nut requires a special wrench most of the time, however. Otherwise, yes, you need an extension.

	<div class=
	IP Logged

buchsenmacher Full Member Offline Posts: 205 Location: Adrian, MI Joined: Apr 18^th, 2004	Re: .22 K-Hornet re-chamber Reply #9 - Sep 28^th, 2015 at 6:02am	Print Post
	OLReliable, I should be able to do the work for you. Give me a call at Johnson's Sporting Goods 517-265-2545 and we can talk about it. On the 23D the receiver and barrel are one piece of steel.

	Steven Durren Professional member, ACGG
	IP Logged

OLReliable Full Member Offline Posts: 209 Location: New England Joined: Jul 14^th, 2004	Re: .22 K-Hornet re-chamber Reply #10 - Sep 28^th, 2015 at 7:35am	Print Post
	buchsenmacher wrote on Sep 28^th, 2015 at 6:02am: OLReliable, I should be able to do the work for you. Give me a call at Johnson's Sporting Goods 517-265-2545 and we can talk about it. On the 23D the receiver and barrel are one piece of steel. Thanks, Steve. I will call you this week. Gary

	OLR wyyyyyyy iiiyyyyyy awwwttta ......
	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: .22 K-Hornet re-chamber Reply #11 - Sep 28^th, 2015 at 8:05am	Print Post
	I stand corrected. I thought the 23D was the introduction of the barrel nut.

	<div class=
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.0869 seconds.