ASSRA Forum › General › Gunsmithing Single Shot Rifles › Project nearing compleation
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) Project nearing compleation (Read 3568 times)
JSB30
Senior Forum Member
****
Offline



Posts: 407
Location: Missouri
Joined: Apr 30th, 2011
Project nearing compleation
Sep 23rd, 2013 at 9:12am
Print Post  
Martini Cadet 25-20 SS, Shilen 1-10 barrel. Leupold M8 6X. Still needs more shaping on stock then polisher and blued.
  
Back to top
 
IP Logged
 
Chuckster
Frequent Elocutionist
*****
Offline



Posts: 2311
Location: Colorado
Joined: May 15th, 2008
Re: Project nearing compleation
Reply #1 - Sep 23rd, 2013 at 10:55am
Print Post  
Good looking job. The word "polisher" scares me. Easy to mess it up, but you certainly seem to know what you are doing.
Chuck
  
Back to top
 
IP Logged
 
Kermit1945
Oldtimer
*****
Offline



Posts: 980
Location: In Flux
Joined: Aug 31st, 2011
Re: Project nearing compleation
Reply #2 - Sep 23rd, 2013 at 11:07am
Print Post  
Someone I'd trust to polish and blue with no fear is Mel Doyle. His shop number: 208-686-1006
  
"Speed's fine, but accuracy's final." Bill Jordan
"Anything worth doing is worth doing slowly." Mae West
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10625
Joined: Apr 8th, 2009
Re: Project nearing compleation
Reply #3 - Sep 23rd, 2013 at 12:17pm
Print Post  
Buffing is a more concerning word, polishing does leave a lot to the imagination and can also be of some concern.
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12333
Location: Why, out West of course
Joined: May 29th, 2006
Re: Project nearing compleation
Reply #4 - Sep 23rd, 2013 at 12:42pm
Print Post  
Nice checkering, maybe some inlays here and there. A naked babe carved in the side of the butt stock.  Love the caliber.  Yes, it's getting there.   

   Joe.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
ClaMar
Full Member
***
Offline



Posts: 141
Location: Texas
Joined: Jul 23rd, 2013
Re: Project nearing compleation
Reply #5 - Sep 23rd, 2013 at 1:24pm
Print Post  
Still some major work to bend the lever to fit.  I'd suggest doing that and inletting it into the front of the pistol grip.  Makes a really nice looking job.

Clarence
  
Back to top
 
IP Logged
 
Walter  Matera
Ex Member


Re: Project nearing compleation
Reply #6 - Sep 23rd, 2013 at 1:26pm
Print Post  
westerner wrote on Sep 23rd, 2013 at 12:42pm:
Nice checkering, maybe some inlays here and there. A naked babe carved in the side of the butt stock.  Love the caliber.  Yes, it's getting there.  

   Joe.

Definitely second the naked babe on the butt stock.  Cheesy
  
Back to top
 
IP Logged
 
jhm
Frequent Elocutionist
*****
Offline



Posts: 2036
Location: georgia
Joined: Sep 4th, 2011
Re: Project nearing compleation
Reply #7 - Sep 23rd, 2013 at 7:01pm
Print Post  
Built one similar to yours in 25-20 WCF with a GM barrel. Shot real good but sold it later(wish I had it back)to a friend. Let us see it when it's done.

JHolland
  
Back to top
 
IP Logged
 
nuclearcricket
Oldtimer
*****
Offline



Posts: 823
Joined: Oct 15th, 2008
Re: Project nearing compleation
Reply #8 - Sep 24th, 2013 at 9:27am
Print Post  
Looking very nice so far. Now for a question, where did you get the stock? 
Sam
  
Back to top
 
IP Logged
 
JSB30
Senior Forum Member
****
Offline



Posts: 407
Location: Missouri
Joined: Apr 30th, 2011
Re: Project nearing compleation
Reply #9 - Sep 25th, 2013 at 1:09pm
Print Post  
I made the stock from a blank. I like the levers with the reverse radius i them. It fells like a Schultzen lever if you hold it on the outside or the lever. I have had some both ways and really like it this way. Here is a another  one in .218 Bee.
  
Back to top
 
IP Logged
 
JSB30
Senior Forum Member
****
Offline



Posts: 407
Location: Missouri
Joined: Apr 30th, 2011
Re: Project nearing compleation
Reply #10 - Sep 25th, 2013 at 1:15pm
Print Post  
This one is interesting and should draw comments. Orginal 1885 Winchester rebarreled for 375 H&H. Handmade quarter rib cut for Talley rings.  Stock made from a blank
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7117 seconds.