ASSRA Forum › General › Gunsmithing Single Shot Rifles › GM Leveraction Barrels
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic GM Leveraction Barrels (Read 3004 times)
nuclearcricket
Oldtimer
*****
Offline



Posts: 823
Joined: Oct 15th, 2008
GM Leveraction Barrels
Sep 21st, 2013 at 2:50pm
Print Post  
I see that Green Mountain offers a lever action octagon barrel in 32-20 with a 1-22 twist. I was wondering if anyone had any experience with these barrels and how well they shoot.  I was thinking that if they shoot well that it would make a nice barrel to put on a Cadet action and chamber it in 32-20.
TIA
Sam
  
Back to top
 
IP Logged
 
kodiak1
Junior Member
**
Offline



Posts: 72
Location: Alberta Territory
Joined: Jun 16th, 2009
Re: GM Leveraction Barrels
Reply #1 - Sep 21st, 2013 at 4:59pm
Print Post  
Have not gotten one.  Checked into it about a year and a half ago but to get it across the boarder all the extra BS almost doubled the cost of the barrel.
Made me sad to tell the importer to not do it.

Ken. Cry
  
Love to Live, Live to Shoot
Back to top
 
IP Logged
 
boats
Frequent Elocutionist
*****
Offline



Posts: 7728
Location: Virginia
Joined: Apr 23rd, 2004
Re: GM Leveraction Barrels
Reply #2 - Sep 23rd, 2013 at 8:19am
Print Post  
GM on my .22 Low Wall is one of their pre contoured unthreaded stub Winchester barrels. Same as the Lever Barrels.

It's a great shooter

Boats
  
Back to top
 
IP Logged
 
singleshotsam
Oldtimer
*****
Offline



Posts: 594
Location: Silver City NM
Joined: Jan 15th, 2009
Re: GM Leveraction Barrels
Reply #3 - Sep 23rd, 2013 at 11:31am
Print Post  
Nuclear,

  I have installed several in 32-20 and 25-20. Great shooters from all indications. I have used Green Mountain barrel in calibers from 22 to 50 and had excellent results from each one.

SSS
  
Back to top
 
IP Logged
 
nuclearcricket
Oldtimer
*****
Offline



Posts: 823
Joined: Oct 15th, 2008
Re: GM Leveraction Barrels
Reply #4 - Sep 24th, 2013 at 9:28am
Print Post  
Thank you, that was pretty much the answer I was hoping for. I felt that the barrels would be good but wanted to see if anyone could confirm. I currently have one GM barrel to be put on a roller, it will be a 44-77, but it will be a while before that project will be finished.
Sam
  
Back to top
 
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1221
Location: CT
Joined: Dec 14th, 2008
Re: GM Leveraction Barrels
Reply #5 - Sep 24th, 2013 at 1:34pm
Print Post  
sss what is the profile and twist like on the 25cal barrel?  thanks  art
  
Back to top
 
IP Logged
 
Deadeye Bly
Frequent Elocutionist
*****
Offline



Posts: 1143
Location: Stephens City
Joined: Feb 25th, 2011
Re: GM Leveraction Barrels
Reply #6 - Sep 25th, 2013 at 8:55am
Print Post  
I see on Green Mountain's website that it is not in stock. I spoke with Dennis at GM last year and he told me that the .32 caliber barrels had been discontinued. You may find one at Track of the Wolf or some other stocking dealer.
  
Back to top
 
IP Logged
 
Larry D
Full Member
***
Offline



Posts: 164
Location: Ventura ca.
Joined: Jan 12th, 2013
Re: GM Leveraction Barrels
Reply #7 - Sep 27th, 2013 at 11:13pm
Print Post  
I have used GM barrels on a 222r martini cadet and a H&A  922, price is right and shoot better than I.....Larry
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.5502 seconds.