ASSRA Forum › General › Gunsmithing Single Shot Rifles › Home made trigger/sear honing jig
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Home made trigger/sear honing jig (Read 2108 times)
Joe_S
Frequent Elocutionist
*****
Offline



Posts: 1076
Joined: Jun 29th, 2004
Home made trigger/sear honing jig
Jan 25th, 2009 at 5:27pm
Print Post  
I came across a photo in one of my gun books of a home made trigger/sear honing jig, and when I tried to get back to it I could not find it. Can anyone post a photo or a reference to one? Thanks! Joe S
  
Back to top
 
IP Logged
 
MI-shooter
Moderator
*****
Offline



Posts: 699
Location: SE Michigan
Joined: Apr 18th, 2004
Re: Home made trigger/sear honing jig
Reply #1 - Jan 26th, 2009 at 12:26pm
Print Post  
I made one for a martini sear jig and did a write up of it some time in the past couple of years in the Journal. I'll see if I can find another picture of it. Give me a day or two

Ed
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.1804 seconds.