Google is letting me down. Can't find the 310 shop, anybody know the web-site address

Boats

Boats, I sent you an e-mail with an old mailing list.  Anybody else wanting to reach Randy Davis at the 310 Shop may want to e-mail him at; 

                      The310ShopATaolDOTcom

He was beginning to have dies made in the more requested, long discontinued calibers from Lyman/Ideal.

HTH ~ Froggie

Try this:

(You need to Login or Register to view media files and links)

Flatlander

Froggie,

Do you have any idea if the 25-20 WCF seating die will support the 25-20 SS case well enough to seat a bullet without damage?

Terry

Thanks for the reply Froggie.  I have been unsuccessfully chasing after some used 25-20 SS dies, hoping to avoid the high cost of new ones, but they are pretty scarce.  Your post related to using the 25-20 WCF dies caught my eye and it made sense that using them to neck size only would work.  Since I would not be using the reloaded cases in multiple rifles, not being able to full length resize had no impact.  I assume the cases would last much longer also .  I think it's worth finding a cheap used set of 25-20 WCF dies to try.  Thanks for bringing up the subject Froggie.  Terry

Thanks Tar_Baby!!  Terry

Boats,

While I would like to have a 310, I was thinking more along the lines of using some cheap used 25-20 WCF dies in my old RCBS Jr press to neck size and seat bullets in my 25-20 SS cases.  I just got outbid on what looks like a reatively nice Ideal #4 in 25-20 SS a few minutes ago...dang snipers  ...Terry

Tar-Baby,

Thanks very much for doing that.  It looks like an alternative to the expensive, unobtainium, 25-20 SS dies.  Now I need to snare some inexpensive used 25-20 WCF dies.  Thanks again for your help.

Terry