32 miller short in a miller action with a Ron Smith gain twist (ends in 11 1/2")
13gr. H-108
357 max cases cut lenght
WSR primer
cork wad down on powder
215 gr bullet 3 groove SP Bullet Mould Made by Borton & Darr 
cast 1 tin to 24 parts lead
Vel. Is 1525 fps
Now H-108 is no longer on the market, But there is a suplus powder on the market, WW820 which is h-108. Mr Darr and I have test 820  and it gives the same numbers as H-108 with the same loads

32-40, 1:15 twist 28" #4 weight Douglas Barrel
Federal 210 M Primer
13.4 Grains of AA #9
Cork wad set .200" off the powder
Hoch .322-200 Bullet  (Hoch version of the Barnett .32 B2)
Cast 32 parts Lead : 1 part Tin
1460 FPS

Caliber 28-30 Stevens, my rifle is a Winchester with a 30" tapered Stevens barrel, bore diameter is .284. I've had good luck with 10 grains of H4227, a Federal 150 primer in a Dave Casey RMC case. I'm using a Barry Darr 135 grain bullet, 5% tin alloy, without a wad. I find the accuracy to be close to 32-40 with almost no recoil.

Bob

Douglas 32-40 heavy barrel 1:16 twist
208 gr Darr spitzer, Fed 150 primers
14.5 H4227, no wad, Javalina Lube
on a Hoch action
Regards, Joe

CPA 32-40 Model 52
Douglas Premium 28" 1-15 Twist
B&D 220 Gr. Bullet-Breech Seated
Bullet Engraves 1/2 Way Through Base Band
1/16 Cork Wad Seated Behind Bullet
13.7 Grs H-108
Velocity 1434
Rem 91/2 Primers
Dell 59 C Lube-Darr Lube Pump

In the middle 70's I traded a break open 45-70 single shot for a Remington Rolling Block 11mm egyptian converted to 45-70 with a navy arms octagon barrel and stock with a curved steel butt plate from another schuetzen shooter.I had a Unertyl scope installed,made a bullet breech seater,bought a Lee electric melting pot,lee aluminum 405 bullet mold and used SR4759 & IMR 4198 powders with a dacron over powder wad.Breech set one 500gr soft lead bullet one time and fired it, still remember the discomfort vowing not to do that again.Here's a site I'm interested in for 45-70 using shotgun & pistol powders with lead bullets (You need to Login or Register to view media files and links) .

in a .45-90, 105 gr of Goex Exp. a CCIBR2 primer, over primer wad of newspaper, overpowder wad of 0.06 Walter's fiber wad and 550 gr swaged Sharps long range bullet wrapped with Eaton 9# airmail paper - sized to .450" diameter.

In a .45-100 107.5 gr of Swiss 1fg, WLR primers and all else the same as above.

In .22 long rifle at any range off the bench - Eley Tenex Ultimate EPS.  Offhand, Wolf Match Extra.   

Brent