ASSRA Forum › General › Gunsmithing Single Shot Rifles › Fitting stocks
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) Fitting stocks (Read 14645 times)
Brent
Ex Member


Fitting stocks
Sep 13th, 2004 at 3:15pm
Print Post  
I just got my fancy new .22 back from Billy Tierce.  I had him fit a partially inletted English walnut blank to my low wall bloop barreled .22.  I managed to make it especially challenging for him, but he really did a very very nice job.  And the day AFTER it arrived, the bill showed up.  So, he doesn't take your money until after you have seen his work.  I couldn't ask for more.   

I recommend him highly, if, like me, you just can't find the time to fit up a new piece of wood.  In my case, he did the fitting and major sanding and I'll finish sand it and the finish it myself.  After that, I will probably have him checker it.   

But before that happens, some squirrels are in serious trouble.  Maybe a few targets too.

Brent
  
Back to top
 
IP Logged
 
ken_hurst
Ex Member


Re: Fitting stocks
Reply #1 - Sep 13th, 2004 at 6:18pm
Print Post  
I told you so, I told you so  Grin .   You will love his checkering Brent !  Tell him to use the crazy glue on your checkering job -- he'll know what to do. Those 3/1 ratio diamonds will wear forever and the grain will flow thru perfectly.  I have a few more to send him myself. So far, everyone he has done for me was perfect !  Try him for his ice bluing -- wears almost as good as a slow rust blue. The finish is tougher and the blue is deeper than a regular blue. He blues about once a week. I would suggest you hand polish the metal first to save money & for a more profeshional look.     Ken
  
Back to top
 
IP Logged
 
Brent
Ex Member


Re: Fitting stocks
Reply #2 - Sep 14th, 2004 at 9:24am
Print Post  
Yup Ken, you were right.  I'll do my own bluing though. I enjoy rust bluing and I think I do a pretty good job of it.  Next however, is the stock finishing job.  I have to decide whether I want to add a little color or not.   

Brent
  
Back to top
 
IP Logged
 
ken_hurst
Ex Member


Re: Fitting stocks
Reply #3 - Sep 14th, 2004 at 11:25am
Print Post  
Have you given thought to using alkanet root ?  I have used the ground up version of the root and added it to turp.  Put solution in large mayo jar & placed it in a large pan of boiling water to really/quickly bring out color. I will shake the jar from time to time to help agitate the mix to get more color. Nice thing about using turp is that you don't have to sand raised grain back down. Works fine for me on Eng. walnut.    Ken
  
Back to top
 
IP Logged
 
marlinguy
Ex Member
*****


Ballards may be weaker,
but they sure are neater!
Re: Fitting stocks
Reply #4 - Sep 14th, 2004 at 6:00pm
Print Post  
Ken,
Where does one find alkanet root?
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
ken_hurst
Ex Member


Re: Fitting stocks
Reply #5 - Sep 14th, 2004 at 9:40pm
Print Post  
Welll, first you gotta find an alkanet bush  Grin    Okay, just couldn't resist doing that.  I would suggest you contact a wood workers supply house.  What I have was donated to me by a guy some years back and I don't know where he got it.   Ken
  
Back to top
 
IP Logged
 
Brent
Ex Member


Re: Fitting stocks
Reply #6 - Sep 15th, 2004 at 8:23am
Print Post  
Quote:
Ken,
Where does one find alkanet root?


Marlinguy, I think Dixie Gun Works sells it.  At least they used to.   

For this rifle, I am thinking of following some ideas suggested by Stephen Dodd Hughes.  He uses a stain that I believe is alcohol based and he puts it on AFTER a coat of sealer (Permalyn).  I've seen several of his guns in a museum show two years back or so, and his books of course.  They impressed the heck out of me, so I thought I would go that route.   

Brent

  
Back to top
 
IP Logged
 
ken_hurst
Ex Member


Re: Fitting stocks
Reply #7 - Sep 15th, 2004 at 11:38am
Print Post  
FWIW -- I tried soaking the alkanet root in a thinner for about two weeks but had no luck getting the stain to leach out into the thinner. didn't try rubbing alcohol however as it contains mostly water. Turp however did very well for me and is alsoan organic vehicle and compatible with wood.   This is interesting Brent, please keep us posted .   Ken
  
Back to top
 
IP Logged
 
PETE
Ex Member


Re: Fitting stocks
Reply #8 - Sep 15th, 2004 at 5:16pm
Print Post  
Marlinguy,

 Brent's right. In Dixie's 2003 catalog they list Alkanet Root for sale for $33.95. Pretty pricey stuff!! No particulars other than they have it, so if you're looking for some it might pay to call and find out what amount you get and if it's in solution or not.

PETE
  
Back to top
 
IP Logged
 
Jimofatl
Junior Member
**
Offline



Posts: 87
Location: Georgia
Joined: Apr 16th, 2004
Re: Fitting stocks
Reply #9 - Sep 15th, 2004 at 5:45pm
Print Post  
Brent, 

Since it is a Winchester, You might look at this site
(You need to Login or Register to view media files and links)

Jim
  
Back to top
WWW  
IP Logged
 
First_Shirt
Ex Member


Re: Fitting stocks
Reply #10 - Sep 15th, 2004 at 5:59pm
Print Post  
You can get ground alkanet root from "From Nature With Love".  They also have very nice yellow beeswax and anhydrous lanolin for boolit lube.  Try this link 

(You need to Login or Register to view media files and links)

Price is a LOT better than Dixie, too!

Greg
  
Back to top
 
IP Logged
 
Brent
Ex Member


Re: Fitting stocks
Reply #11 - Sep 16th, 2004 at 8:26am
Print Post  
Jim,
I know of winrest - and I use their rust blue solution and have used their red-oil finish.  On this particular rifle, I will use the same bluing for the barrel, but finish will be entirely different.  An original winnie has a red-stained Iowa black walnut stock, but this rifle has a custom stock that is made of California english walnut from Cecil Fredi.  And that is just the beginning of it's oddities.  In the end, it will be a rifle built to please only me.   


Brent
  
Back to top
 
IP Logged
 
Dale53
Oldtimer
*****
Offline



Posts: 810
Location: Southwestern Ohio
Joined: Apr 17th, 2004
Re: Fitting stocks
Reply #12 - Sep 16th, 2004 at 10:35am
Print Post  
Brent;
I my "Not so humble opinion", pleasing "Me" is a high aspiration. All of the great works were done by people pleasing "me" (the artist, author, etc). The fact that other people like it is a bonus....

Dale53
  
Back to top
 
IP Logged
 
Brent
Ex Member


Re: Fitting stocks
Reply #13 - Sep 16th, 2004 at 10:52am
Print Post  
Dale, I agree, but my fragile ego might be bruised if everyone snickers when I pull it out of the case Smiley Smiley

In the end, it will be a pretty guy I think.  After the first coat last night, I may not stain afterall.  The wood looks just about right as it is.   

Brent
  
Back to top
 
IP Logged
 
PETE
Ex Member


Re: Fitting stocks
Reply #14 - Sep 16th, 2004 at 11:08am
Print Post  
Brent,

You gonna have this famous gun done in time to do some squirrel hunting with it this Fall? Or is it to pretty for that!?  Smiley

PETE
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.3223 seconds.