Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Sights for Sharps Borchardt Musket (Read 88 times)
PRD1
Newbie
*
Offline



Posts: 2
Joined: Nov 17th, 2026
Sights for Sharps Borchardt Musket
Yesterday at 9:43am
Print Post  
  Recently acquired a very good Sharps Borchardt musket in .45-70, with a perfect bore (really!)  If course I want to shoot it, and have done so with a couple of cast bullet loads.  I expected it to shoot pretty high at usual target ranges, and likely somewhere other than centered left and right, due to the rather primitive military sights, and was not surprised that it did shoot some 9.5" high and 1" left at 50 yards, but put 10 shots into 1.25" c.-to-c., which is very promising, considering the sight combination and my old eyes.  I'm used to having to provide a taller front sight on my trapdoors, etc., to bring the POI lower when shooting at 100 yards, but the Borchardt has its front sight blade integral with its base, and so is not adjustable for elevation or windage, and the rear sight provides only a pretty wide 'V' notch, which is already at its lowest setting and has no provision for windage adjustment, either.
   For obvious reasons I do not want to make any unalterable changes to the rifle itself, so what I propose to do is fabricate a taller front sight which can be simply attached (with JB weld) to the original front sight, and find a way to attach a Buffington rear sight without drilling any additional holes in the barrel.  What complicates the rear sight option is that the hole spacing for the Borchardt rear sight is different than on the Buffington, and the thread diameter of the screws is also different.
  A friend who also has a Borchardt musket tells me that he has a Buffington installed on his rifle, but I have not yet examined it to see how this was done.  He says that this installation was accomplished using the original holes in the barrel, by drilling an additional hole in the Buffington base, but does not know how the screw problem was solved.  I am willing to drill an additional hole in the Buffington base, but would need to acquire or make new screws of the proper dimensions and thread pitch.
   I believe that this transplant operation has been done by other Bordchardt owners, and would appreciate any input on exactly how it was accomplished.
   If all else fails, I will simply JB the Buffington to the barrel and call it good, but would prefer a more 'mechanical' solution.  I am confident that providing a better sight combination will make the Borchardt a very fine shooter indeed.
   Any helpful input appreciated!

  PRD1 - mhb - MIke
  

Sancho! My armor!
Back to top
 
IP Logged
 
ssrifles
Senior Forum Member
****
Offline



Posts: 330
Joined: Mar 23rd, 2009
Re: Sights for Sharps Borchardt Musket
Reply #1 - yesterday at 10:51am
Print Post  
hi mike, if you need a buffington i have several i got out of an estate couple of years ago. they are very good sights and accurate.  let me know .   tony<><
  
Back to top
 
IP Logged
 
PRD1
Newbie
*
Offline



Posts: 2
Joined: Nov 17th, 2026
Re: Sights for Sharps Borchardt Musket
Reply #2 - yesterday at 11:00am
Print Post  
ssrifles wrote yesterday at 10:51am:
hi mike, if you need a buffington i have several i got out of an estate couple of years ago. they are very good sights and accurate.  let me know .   tony<><



   Thank you, Tony.  I do have a Buffington for the project, and agree that they are excellent for the purpose, providing both elevation and windage adjustment.  Do any of your Buffingtons have the rack and pinion elevation adjustment used on some of the long-range target model Trapdoor rifles?

  PRD1 - mhb - MIke
  

Sancho! My armor!
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint