ASSRA Forum › General › Scopes and Sights › scope block screw spacing
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic scope block screw spacing (Read 124 times)
Win1906
Participating Member
*
Offline



Posts: 49
Location: altona,ny
Joined: Mar 28th, 2026
scope block screw spacing
Oct 23rd, 2026 at 10:42am
Print Post  
i have a stevens model 49 with scope block screw holes spaced about.833 and .656 with 6-48 threads.not original because they go through the lettering.is there someone who has or a place to get blocks that will fit that spaceing.might not be exact measurement but close
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18378
Location: Oregon
Joined: Feb 2nd, 2009
Re: scope block screw spacing
Reply #1 - Oct 23rd, 2026 at 11:46am
Print Post  
You're probably going to have to have one hole elongated to match your spacing. Steve Earle Products sells them in .560", .700", .825" and .860 According to Steve's site older Stevens were .700 front and .825" rear, but yours isn't original, so obviously need reworked mounts.
Get the closest size and heat one end to anneal it. Then elongate one hole and head recess to make it fit.
(You need to Login or Register to view media files and links)
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8145 seconds.