ASSRA Forum › General › Gunsmithing Single Shot Rifles › Remington Rolling Block
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Remington Rolling Block (Read 222 times)
Oldman1950
Senior Forum Member
****
Offline



Posts: 277
Location: Virginia
Joined: Feb 8th, 2014
Remington Rolling Block
Jul 29th, 2026 at 10:31pm
Print Post  
Can a Remington Rolling Block rifle in 25 RF be relined to 22 RF without moving the firing pin location to fire the 22 RF ?

A. J. Palik
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 18177
Location: Oregon
Joined: Feb 2nd, 2009
Re: Remington Rolling Block
Reply #1 - Jul 30th, 2026 at 10:38am
Print Post  
Oldman1950 wrote on Jul 29th, 2026 at 10:31pm:
Can a Remington Rolling Block rifle in 25 RF be relined to 22 RF without moving the firing pin location to fire the 22 RF ?

A. J. Palik


Shouldn't be a problem, but after reaming the chamber you might want to make a slight cut at the rim recess where the firing pin strikes if it might touch the edge of the rim cut.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.4043 seconds.