ASSRA Forum › General › Reloading the Single Shot Rifle › question on converting 405 wcf brass to 40-70 ss
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic question on converting 405 wcf brass to 40-70 ss (Read 61 times)
bullshop
Senior Forum Member
****
Offline



Posts: 405
Joined: Sep 14th, 2017
question on converting 405 wcf brass to 40-70 ss
Yesterday at 5:32pm
Print Post  
My question is will the C. Sharps and or the Shiloh Sharps rifles chambered in 40-70 straight chamber cases made from Hornady or Bertram 405 wcf  without altering the case head or the rim ?
  
Back to top
 
IP Logged
 
bigpaulespo
Participating Member
*
Offline



Posts: 19
Joined: Nov 9th, 2023
Re: question on converting 405 wcf brass to 40-70 ss
Reply #1 - yesterday at 10:38pm
Print Post  
In my C Sharps 1874 with the 405 brass, it is trim to length, run through the sizing die (only before first firing), and load. No issues with the rim. The .410 Snover from you, load right up.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8837 seconds.