ASSRA Forum › General › Reloading the Single Shot Rifle › Correct 25-20SS Shell Holder
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Correct 25-20SS Shell Holder (Read 182 times)
WinHWFan54
Participating Member
*
Offline



Posts: 22
Location: Iowa, USA
Joined: Sep 24th, 2015
Correct 25-20SS Shell Holder
Yesterday at 11:40pm
Print Post  
I was trying to figure out which size and brand of shell holder works for the 25-20SS rifle case? Any suggestions or do I have to have a small one machined for that case rim? regards
  
Back to top
 
IP Logged
 
Cbashooter
Frequent Elocutionist
*****
Offline



Posts: 1612
Location: Eastern Wa.
Joined: Mar 31st, 2018
Re: Correct 25-20SS Shell Holder
Reply #1 - yesterday at 11:54pm
Print Post  
Same a .222/223 family. RCBS #10 works well for me
  
Back to top
 
IP Logged
 
SteveStevens
Participating Member
*
Offline



Posts: 34
Location: Fredericktown Ohio
Joined: Jan 12th, 2026
Re: Correct 25-20SS Shell Holder
Reply #2 - Today at 7:02am
Print Post  
At one time RCBS made a shell holder specifically for the 25-20 Single Shot as did CH4D  but as far as I know they are  out of production?  A  Redding #10 for 223  works OK for the Bertram brass I have however I bought a handful of old Winchester and UMC brass at a gun show and a good bit of it would not go in the shell holder until I preformed a small amount to work on the rims with a file.
  
Back to top
 
IP Logged
 
kootne
Senior Forum Member
****
Offline



Posts: 472
Location: Libby, Mt.
Joined: Mar 6th, 2012
Re: Correct 25-20SS Shell Holder
Reply #3 - Today at 10:35am
Print Post  
Buffalo Arms, in stock;

(You need to Login or Register to view media files and links)
  
You can't make good decisions without good information.
Back to top
 
IP Logged
 
Bent_Ramrod
Frequent Elocutionist
*****
Offline



Posts: 1569
Location: Southern Arizona
Joined: Feb 8th, 2006
Re: Correct 25-20SS Shell Holder
Reply #4 - Today at 4:24pm
Print Post  
The .223 shell holder works for many shells, but for the other, thicker-rimmed ones, I use an old one I found for the .32 Long Colt.
  
Back to top
 
IP Logged
 
WinHWFan54
Participating Member
*
Offline



Posts: 22
Location: Iowa, USA
Joined: Sep 24th, 2015
Re: Correct 25-20SS Shell Holder
Reply #5 - Today at 5:26pm
Print Post  
thanks to all for the replies, I tried a .223 RCBS SH and it works quite well!
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.5521 seconds.