ASSRA Forum › General › Gunsmithing Single Shot Rifles › Mystery trap Buttplate ?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Mystery trap Buttplate ? (Read 306 times)
hairtrigger
Participating Member
*
Offline



Posts: 48
Location: Illinois
Joined: Dec 10th, 2007
Mystery trap Buttplate ?
Feb 28th, 2026 at 4:47pm
Print Post  
Was this a commercial conversion of the std. Win. Plate ? It’s the only one I’ve ever seen. A friend found it in a odds & ends box at a gun show & bought it cause he knew I would have to have it. It appears to have a two digit # no. On the inside ? It was very well thought out & executed and works extremely crisp.  Does anyone know anything re: who made this trap buttplate ?
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12214
Location: Why, out West of course
Joined: May 29th, 2006
Re: Mystery trap Buttplate ?
Reply #1 - Feb 28th, 2026 at 5:09pm
Print Post  
Now I want it. Neat! The two prongs snap over the screw head to hold it closed?
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
cellargun
Full Member
***
Offline



Posts: 153
Joined: Feb 28th, 2022
Re: Mystery trap Buttplate ?
Reply #2 - Feb 28th, 2026 at 6:00pm
Print Post  
westerner wrote on Feb 28th, 2026 at 5:09pm:
Now I want it. Neat! The two prongs snap over the screw head to hold it closed?

It looks to me as if the screw holds the spring, The loop over centers against the flat on the bottom of the stem when the door is open. Because the loop is beyond the pivot, it holds the door shut.
Easy peasy lemon squeezy.
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12214
Location: Why, out West of course
Joined: May 29th, 2006
Re: Mystery trap Buttplate ?
Reply #3 - Mar 1st, 2026 at 11:39am
Print Post  
Thanks CG, now I see it.
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
Siskadee
Newbie
*
Offline



Posts: 1
Joined: Oct 18th, 2023
Re: Mystery trap Buttplate ?
Reply #4 - Mar 1st, 2026 at 7:41pm
Print Post  
A friend of mine has one liked that only the door is checkered as well.  It's on an old sporter Springfield 1903 likely made in the early teens.  Low number and long slide with an 'S grip' (like a Ballard grip).  I did not remove the buttplate, so I don't know if the internal mechanism is the same.  I just assumed it was build by the stocking gunsmith.
  
Back to top
 
IP Logged
 
2152hq
Participating Member
*
Offline



Posts: 29
Joined: Oct 18th, 2024
Re: Mystery trap Buttplate ?
Reply #5 - yesterday at 10:57am
Print Post  
I'd guess it was a custom mfg on an orig (maybe repro) Win steel butt plate.

The trapdoor parts look modern mfg. 
 
The extension on the back side is staked into place in the door itself makes me think of modern mfg, along with the seam betw the tang and door showing on the front side .
everything 'In the White'.

The door parts, tang, screw, skeleton/wire spring all look much more like add on mfg parts than the plate. 
Those parts are In the White as well.

?? Is the small lug that the screw is threaded into a separate piece perhaps hard soldered on.. or a solid orig piece of the butt plate itself.?

An aftermarket, small production # project is my guess.


just my thoughts.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2217 seconds.