ASSRA Forum › General › Gunsmithing Single Shot Rifles › need chamber casting ladle ideas
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 10 Replies) need chamber casting ladle ideas (Read 263 times)
bohemianway
Oldtimer
*****
Offline



Posts: 688
Location: Andover, MN
Joined: Apr 16th, 2004
need chamber casting ladle ideas
Jan 28th, 2026 at 9:25pm
Print Post  
I have been using an old ideal ladle but it just does not have the capacity to fill the larger chambers.
Are there any available device like teapots or syrup dispensers that do the trick?

Thank you,
Charles
  
Back to top
GTalk  
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2542
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: need chamber casting ladle ideas
Reply #1 - Jan 28th, 2026 at 9:58pm
Print Post  
I picked up a trick somewhere.  Cut an old coke can in half and pinch one side into a spout.  I melt the cerrosafe in the half-can with a heat gun.

Chris.
  
Back to top
 
IP Logged
 
bpjack
Frequent Elocutionist
*****
Offline



Posts: 3594
Location: East Olympia, WA
Joined: May 18th, 2008
Re: need chamber casting ladle ideas
Reply #2 - Jan 28th, 2026 at 10:31pm
Print Post  
My 'custom' pouring device.
  
ASSRA # 11318
Experience is something you don't get until just after you need it.
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2542
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: need chamber casting ladle ideas
Reply #3 - Jan 28th, 2026 at 11:19pm
Print Post  
Oooh.  Classier than mine Smiley   I like the handles.  I have to use a glove with mine.
  
Back to top
 
IP Logged
 
KFW
Oldtimer
*****
Online



Posts: 613
Location: Wyoming
Joined: Dec 18th, 2016
Re: need chamber casting ladle ideas
Reply #4 - Jan 29th, 2026 at 12:55pm
Print Post  
The old fashion iron small plumbers lead ladle.
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 17631
Location: Oregon
Joined: Feb 2nd, 2009
Re: need chamber casting ladle ideas
Reply #5 - Jan 29th, 2026 at 1:42pm
Print Post  
I used to use an old soup can like Jack showed. But I got fancy when I stopped at a Goodwill store and found one of those little stainless steel creamer pots the restaurants used to have on their tables! I've been using that ever since and it works great. I did cut the hinged lid off as it just got in the way.
Check garage sales, and thrift stores!
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
John Taylor
Frequent Elocutionist
*****
Offline



Posts: 1832
Location: Lewiston, ID
Joined: Oct 23rd, 2006
Re: need chamber casting ladle ideas
Reply #6 - Jan 29th, 2026 at 3:13pm
Print Post  
bpjack wrote on Jan 28th, 2026 at 10:31pm:
My 'custom' pouring device.

That's what I use also.
  
John Taylor   Machinist/gunsmith
Back to top
WWW  
IP Logged
 
bohemianway
Oldtimer
*****
Offline



Posts: 688
Location: Andover, MN
Joined: Apr 16th, 2004
Re: need chamber casting ladle ideas
Reply #7 - Jan 29th, 2026 at 6:10pm
Print Post  
I will have to scour the thrift shops. Somethin with a spout to reach into a Sharps or HW would be good.

Thank you,
Charles
  
Back to top
GTalk  
IP Logged
 
yamoon
Oldtimer
*****
Offline


NRA Life, ASSRA , GGCA,
MCA

Posts: 967
Location: Junction City Kansas
Joined: Feb 11th, 2012
Re: need chamber casting ladle ideas
Reply #8 - Jan 29th, 2026 at 6:39pm
Print Post  
I use a beer can, of course you have to drink the beer first.
Mike
  
Back to top
 
IP Logged
 
marlinguy
Frequent Elocutionist
*****
Offline


Ballards may be weaker,
but they sure are neater!

Posts: 17631
Location: Oregon
Joined: Feb 2nd, 2009
Re: need chamber casting ladle ideas
Reply #9 - yesterday at 10:48am
Print Post  
bohemianway wrote on Jan 29th, 2026 at 6:10pm:
I will have to scour the thrift shops. Somethin with a spout to reach into a Sharps or HW would be good.

Thank you,
Charles


I take heavy paper and roll it into a funnel shape first, then tape it to hold the shape. I make the end small enough to fit the chamber and just pour my molten Cerosafe into the funnel. It melts at such low temps the funnel wont even discolor when pouring it.
  
(You need to Login or Register to view media files and links)
Back to top
 
IP Logged
 
waterman
Frequent Elocutionist
*****
Offline



Posts: 2959
Location: Behind the Redwood Curtain
Joined: Jun 9th, 2004
Re: need chamber casting ladle ideas
Reply #10 - yesterday at 2:19pm
Print Post  
Cat food can or similar?  Vice-grip pliers for a handle.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2026. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.7819 seconds.