ASSRA Forum - 44-77 sharps Shiloh chamber

ASSRA Forum › General › General Discussion › 44-77 sharps Shiloh chamber

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

44-77 sharps Shiloh chamber (Read 200 times)

Oleblacksmith Junior Member Offline Posts: 63 Joined: Jan 10^th, 2024	44-77 sharps Shiloh chamber Jan 20^th, 2026 at 7:11pm	Print Post
	is a 44-77 sharps shiloh chamber different than an original 44-77 sharps?


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17594 Location: Oregon Joined: Feb 2^nd, 2009	Re: 44-77 sharps Shiloh chamber Reply #1 - Jan 20^th, 2026 at 7:21pm	Print Post
	As far as I know it's tighter. The Shiloh Sharps use a .446" groove, so smaller diameter bullet and tighter neck. The original two I have are both .452" groove made for a paper patched .446" bullet.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Oleblacksmith Junior Member Offline Posts: 63 Joined: Jan 10^th, 2024	Re: 44-77 sharps Shiloh chamber Reply #2 - Jan 20^th, 2026 at 7:49pm	Print Post
	marlinguy wrote on Jan 20^th, 2026 at 7:21pm: As far as I know it's tighter. The Shiloh Sharps use a .446" groove, so smaller diameter bullet and tighter neck. The original two I have are both .452" groove made for a paper patched .446" bullet. Thanks, That was what I was assuming much like the 40-65 Shiloh.


	IP Logged

ssdave Frequent Elocutionist Offline Posts: 2100 Location: Eastern Oregon Joined: Apr 16^th, 2004	Re: 44-77 sharps Shiloh chamber Reply #3 - Jan 21^st, 2026 at 10:55pm	Print Post
	Rim Thickness I think is thinner too. The 44 77 brass I have was made to fit Shiloh chambers


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9623 seconds.