ASSRA Forum › General › Gunsmithing Single Shot Rifles › Winchester 1885 barrel info
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Winchester 1885 barrel info (Read 231 times)
cellargun
Full Member
***
Offline



Posts: 106
Joined: Feb 28th, 2022
Winchester 1885 barrel info
Dec 23rd, 2025 at 2:29pm
Print Post  
At what point do you need to relieve the bottom of the barrel for leaf spring clearance on a Winchester single shot? More specifically, what size barrel(s) require clearance? 
I have a round barrel I want to install on a lowwall, mostly because it was free and looks good inside. 
It will be 1.080" at the face of the receiver, just a bit larger than a #3, which is 1.050.
Or, do I need to do anything at all?
Thanks, Richard
  
Back to top
 
IP Logged
 
westerner
Frequent Elocutionist
*****
Offline


deleted posts and threads
record holder.

Posts: 12077
Location: Why, out West of course
Joined: May 29th, 2006
Re: Winchester 1885 barrel info
Reply #1 - Dec 23rd, 2025 at 2:53pm
Print Post  
#4s here are 1.130. No relief required. 

Are you releived to hear that? Huh
  
A blind squirrel runs into a tree every once in a while.
Back to top
 
IP Logged
 
cellargun
Full Member
***
Offline



Posts: 106
Joined: Feb 28th, 2022
Re: Winchester 1885 barrel info
Reply #2 - Dec 23rd, 2025 at 10:06pm
Print Post  
westerner wrote on Dec 23rd, 2025 at 2:53pm:
#4s here are 1.130. No relief required. 

Are you releived to hear that? Huh


I have a #3 on a highwall with no cut, and after your answer, there's no relief in sight.
  
Back to top
 
IP Logged
 
art_ruggiero
Frequent Elocutionist
*****
Offline



Posts: 1194
Location: CT
Joined: Dec 14th, 2008
Re: Winchester 1885 barrel info
Reply #3 - Dec 24th, 2025 at 11:00am
Print Post  
try a laxative for relief         Cheesy Cheesy art
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6144 seconds.