ASSRA Forum › General › Single Shot Rifles › Likes or dislikes of .308 in 1885
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Likes or dislikes of .308 in 1885 (Read 168 times)
ThreeBears
Newbie
*
Offline



Posts: 7
Joined: Oct 7th, 2025
Likes or dislikes of .308 in 1885
Nov 6th, 2025 at 6:02pm
Print Post  
Does anyone have a Winchester 1885, Hunter in .308 ? What are your thoughts of this combination?
  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 4174
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Likes or dislikes of .308 in 1885
Reply #1 - Nov 6th, 2025 at 6:17pm
Print Post  
If you mean a Browning 1885 it must be OK because it was a factory chambering. If you mean an original Winchester single shot which we call a high wall model 1885, I'd say, no way! 62,000 psi is "stretching it" too far.




9
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2453
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Likes or dislikes of .308 in 1885
Reply #2 - Nov 6th, 2025 at 8:01pm
Print Post  
I'm sure it will be an accurate rifle.   The very first rifle that I ever shot a 10 shot one moa group @ 100m was a Browning 1885 in .270 Winchester.   It was a good gun.

Chris.
  
Back to top
 
IP Logged
 
ThreeBears
Newbie
*
Offline



Posts: 7
Joined: Oct 7th, 2025
Re: Likes or dislikes of .308 in 1885
Reply #3 - Nov 6th, 2025 at 10:54pm
Print Post  
Thank you for your replies.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6242 seconds.