ASSRA Forum - Fire Forming 38-55

ASSRA Forum › General › Reloading the Single Shot Rifle › Fire Forming 38-55

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Hot Topic (More than 10 Replies)

Fire Forming 38-55 (Read 246 times)

4570mike Senior Forum Member Offline Posts: 434 Location: On the Peninsula Joined: Apr 11^th, 2013	Fire Forming 38-55 Nov 2^nd, 2025 at 5:30pm	Print Post
	I need to fire form some 38-55 cases. I was going to use some .36 cal. (.375") round balls and a light (3-4 gr.) charge of 700X shotgun powder. I also have some Accurate No. 9. Haven't had to do this before. Any thoughts or comments? Thanks, Mike.


	IP Logged

Oldman1950 Senior Forum Member Offline Posts: 255 Location: Virginia Joined: Feb 8^th, 2014	Re: Fire Forming 38-55 Reply #1 - Nov 2^nd, 2025 at 5:43pm	Print Post
	I have luck fireforming brass with 10 gr. 700x and the rest of the case filled with cream of wheat topped with a thin foam wad to hold it all together. A. J. Palik


	IP Logged

Cat_Whisperer Frequent Elocutionist Offline No 1, 9.3x74R Posts: 3959 Location: Mountains of Virginia Joined: Apr 17^th, 2004	Re: Fire Forming 38-55 Reply #2 - yesterday at 9:31am	Print Post
	Oldman1950 wrote on Nov 2^nd, 2025 at 5:43pm: I have luck fireforming brass with 10 gr. 700x and the rest of the case filled with cream of wheat topped with a thin foam wad to hold it all together. A. J. Palik I'm too cheap for COW and use grits.

	Cat Whisperer (trk) Chief of Smoke Pulaski Coehorn Works and Skunk Works Drafted May 1970, Retired Maj. U.S.Army assra #9885
	WWW IP Logged

4570mike Senior Forum Member Offline Posts: 434 Location: On the Peninsula Joined: Apr 11^th, 2013	Re: Fire Forming 38-55 Reply #3 - yesterday at 9:46am	Print Post
	Cat_Whisperer wrote yesterday at 9:31am: Oldman1950 wrote on Nov 2^nd, 2025 at 5:43pm: I have luck fireforming brass with 10 gr. 700x and the rest of the case filled with cream of wheat topped with a thin foam wad to hold it all together. A. J. Palik I'm too cheap for COW and use grits. Instant or the 30 min. style


	IP Logged

oneatatime Frequent Elocutionist Offline Posts: 4164 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: Fire Forming 38-55 Reply #4 - yesterday at 10:12am	Print Post
	Mike, depends on the primer;-)


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17275 Location: Oregon Joined: Feb 2^nd, 2009	Re: Fire Forming 38-55 Reply #5 - yesterday at 10:25am	Print Post
	I've used corn cob from dry tumbler media also as filler. I use old bullet lube over the corn cob media to seal it. Any fast pistol powder or shotgun powder works well for me. Usually around 4-5 grains does it.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Cat_Whisperer Frequent Elocutionist Offline No 1, 9.3x74R Posts: 3959 Location: Mountains of Virginia Joined: Apr 17^th, 2004	Re: Fire Forming 38-55 Reply #6 - yesterday at 3:11pm	Print Post
	4570mike wrote yesterday at 9:46am: Cat_Whisperer wrote yesterday at 9:31am: Oldman1950 wrote on Nov 2^nd, 2025 at 5:43pm: I have luck fireforming brass with 10 gr. 700x and the rest of the case filled with cream of wheat topped with a thin foam wad to hold it all together. A. J. Palik I'm too cheap for COW and use grits. Instant or the 30 min. style I live in Virginia. NO self-respecting Virginian would even THINK of using instant.

	Cat Whisperer (trk) Chief of Smoke Pulaski Coehorn Works and Skunk Works Drafted May 1970, Retired Maj. U.S.Army assra #9885
	WWW IP Logged

Babydriver Full Member Offline Posts: 149 Joined: Mar 22^nd, 2024	Re: Fire Forming 38-55 Reply #7 - yesterday at 4:36pm	Print Post
	I’ve use the cream of wheat and my cases got the measles. No kidding. If any end up in the chamber the next case will come out with dimples.


	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11939 Location: Why, out West of course Joined: May 29^th, 2006	Re: Fire Forming 38-55 Reply #8 - yesterday at 4:48pm	Print Post
	I never fire formed 38-55 brass before. Regular loads fire form just fine. BP or smokeless.
	« Last Edit: yesterday* at 5:11pm by westerner* »
	A blind squirrel runs into a tree every once in a while.
	IP Logged

gnoahhh Oldtimer Online Posts: 991 Location: Gaithersburg, MD Joined: Mar 31^st, 2010	Re: Fire Forming 38-55 Reply #9 - yesterday at 6:44pm	Print Post
	Begs the question, fire forming from what? .30-30? .32-40? .32 Special? Begs another question: whyinheck did Winchester name it the .32 "Special"?


	IP Logged

oneatatime Frequent Elocutionist Offline Posts: 4164 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: Fire Forming 38-55 Reply #10 - yesterday at 7:30pm	Print Post
	Maybe Special because the factory load was smokeless but it had a slow twist to make it work well with BP reloads?


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 17275 Location: Oregon Joined: Feb 2^nd, 2009	Re: Fire Forming 38-55 Reply #11 - yesterday at 9:32pm	Print Post
	gnoahhh wrote yesterday at 6:44pm: Begs the question, fire forming from what? .30-30? .32-40? .32 Special? Begs another question: whyinheck did Winchester name it the .32 "Special"? Maybe to make it "special" compared to other cartridges they already were chambering for that were .32's also? They'd already stolen the .32-40 Ballard to call their own, and the .32-20 was already a WCF cartridge, so not much left for them to use.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 0.5124 seconds.