ASSRA Forum - What cartridge is this bullet for?

ASSRA Forum › General › Reloading the Single Shot Rifle › What cartridge is this bullet for?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

What cartridge is this bullet for? (Read 722 times)

bpjack Frequent Elocutionist Offline Posts: 3129 Location: East Olympia, WA Joined: May 18^th, 2008	What cartridge is this bullet for? May 25^th, 2025 at 3:05pm	Print Post
	I picked up a Barnett mould marked 25-1 .3685 .352 I cast some bullets in 30-1 and they measure .737" long with a base of .366 and the front band measuring .357. Kind of fat for a 357 Magnum. Any ideas? Thanks Jack

	ASSRA # 11318 I haven’t lost all my marbles yet but there is definitely a hole in the bag somewhere.
	IP Logged

oneatatime Frequent Elocutionist Offline Posts: 4051 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: What cartridge is this bullet for? Reply #1 - May 25^th, 2025 at 4:59pm	Print Post
	360 Brit or a 9.3mm


	IP Logged

Otony Senior Forum Member Offline Posts: 252 Location: Bandon, Oregon Joined: Jun 5^th, 2021	Re: What cartridge is this bullet for? Reply #2 - May 26^th, 2025 at 12:11am	Print Post
	Heavy bullet for the .38 S&W cartridge? A so called police load used to be factory produced with a 200 grain slug.

	Otony
	IP Logged

cheatin_charlie Senior Forum Member Offline Posts: 389 Location: ohio Joined: Jan 10^th, 2009	Re: What cartridge is this bullet for? Reply #3 - May 27^th, 2025 at 7:40am	Print Post
	How about one of the .35 cal Maynards?


	IP Logged

Deadeye Bly Frequent Elocutionist Offline Posts: 1095 Location: Stephens City Joined: Feb 25^th, 2011	Re: What cartridge is this bullet for? Reply #4 - May 27^th, 2025 at 5:41pm	Print Post
	Would probably work with a 35/30 or 35/40 Maynard. Many of them use a .367" dia. bullet


	IP Logged

bpjack Frequent Elocutionist Offline Posts: 3129 Location: East Olympia, WA Joined: May 18^th, 2008	Re: What cartridge is this bullet for? Reply #5 - May 27^th, 2025 at 7:54pm	Print Post
	There is a mention of tha Mayard bullet the same size as this one in the following thread. (You need to *Login* or *Register* to view media files and links) Might make this mould worth more than I paid for it. Thanks Jack

	ASSRA # 11318 I haven’t lost all my marbles yet but there is definitely a hole in the bag somewhere.
	IP Logged

waterman Frequent Elocutionist Offline Posts: 2883 Location: Behind the Redwood Curtain Joined: Jun 9^th, 2004	Re: What cartridge is this bullet for? Reply #6 - Jun 2^nd, 2025 at 4:56pm	Print Post
	Otony wrote on May 26^th, 2025 at 12:11am: Heavy bullet for the .38 S&W cartridge? A so called police load used to be factory produced with a 200 grain slug. Much too fat for a .38 S&W.


	IP Logged

RJ-35-40 Full Member Offline Posts: 167 Joined: Dec 7^th, 2016	Re: What cartridge is this bullet for? Reply #7 - Jun 3^rd, 2025 at 12:25pm	Print Post
	Jack, FWITW my 35-40 Maynard has a .358 groove with a 12 twist. Your projectile length would work but I don't know about shaving off 10 thousands in a sizer...? Anyone..? Ferris...


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.0174 seconds.