ASSRA Forum - WTB - IMR 4320 in the Dallas Area

ASSRA Forum › General › For Sale/Trade › WTB - IMR 4320 in the Dallas Area

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

WTB - IMR 4320 in the Dallas Area (Read 213 times)

Shanghai Jack Junior Member Offline Posts: 62 Location: texas Joined: Apr 6^th, 2014	WTB - IMR 4320 in the Dallas Area Apr 24^th, 2025 at 1:24pm	Print Post
	Anyone got any stuck back on their shelf they'd part with?


	IP Logged

RJ-35-40 Full Member Offline Posts: 155 Joined: Dec 7^th, 2016	Re: WTB - IMR 4320 in the Dallas Area Reply #1 - Apr 24^th, 2025 at 4:33pm	Print Post
	Jack, I've had some good luck finding smokeless, primers etc. at Scheels in Dallas They have always been helpful on the phone regarding in stock inquiries Bass Pro just north of DFW is another possibility. Bob Shanghai Jack wrote on Apr 24^th, 2025 at 1:24pm: Anyone got any stuck back on their shelf they'd part with?


	IP Logged

Shanghai Jack Junior Member Offline Posts: 62 Location: texas Joined: Apr 6^th, 2014	Re: WTB - IMR 4320 in the Dallas Area Reply #2 - Apr 24^th, 2025 at 5:17pm	Print Post
	Thanks- its been out of production for a while.


	IP Logged

Pinwheel Participating Member Offline Posts: 12 Joined: Apr 27^th, 2010	Re: WTB - IMR 4320 in the Dallas Area Reply #3 - Apr 24^th, 2025 at 7:06pm	Print Post
	Got some in Albuquerque.


	IP Logged

wesg Senior Forum Member Offline Posts: 315 Joined: Sep 13^th, 2004	Re: WTB - IMR 4320 in the Dallas Area Reply #4 - Apr 24^th, 2025 at 7:51pm	Print Post
	If I have any at all, it's likely not enough to bother driving/shipping. Hasn't been on any burn rate charts for a long time. If there's an 'equivalent', you'd have to decide where it lies between 4895, 4064, 4350. I think ... it's between 4895 and 4064. But it might be between 3031 and 4895. Need to dig out old loading manuals to make a sensible decision on that. Service Rifle, .223 or 308, 4895 ... I used a bunch of N-140 instead. And N-150/160 for larger case to bore ratio cartridges, like 6.5x55 and .260 Rem.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.6622 seconds.