(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 [2]  Send TopicPrint
Hot Topic (More than 10 Replies) 40-65 issues (Read 2330 times)
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4186
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: 40-65 issues
Reply #15 - Mar 22nd, 2025 at 10:01am
Print Post  
There is a reason RCBS makes Shiloh Sharps .40-65 dies !!!!!
BECAUSE normal dies will not compress the cases enough and they do not rebound enough in the Match chambers and they stick.
A match chamber is made with high precision for enhanced accuracy and consistency in competitive shooting. 
Usually a match chamber is on the tight side of specs in just about all dimensions.
It also has a short leade and tight throat resulting in the fixed ammunition fitting close to the lands in a more centered position.
A match chamber helps the bullet lie in the chamber in a more concentric fashion to the bore of the rifle.
« Last Edit: Mar 22nd, 2025 at 11:02am by Schuetzendave »  
Back to top
 
IP Logged
 
JHand
Full Member
***
Offline



Posts: 174
Joined: Apr 15th, 2024
Re: 40-65 issues
Reply #16 - Mar 23rd, 2025 at 1:08am
Print Post  
Well, after our schutzen match today, went down to Dad's house. The cases he sized would chamber, but when I closed the block, would not eject. Marked a case with a sharpie and chambered it and the base was the problem. I screwed the Shiloh die in the press, resized, and voila, it ejected! It seems that he did not size the case far enough down. He is going to load up a couple rounds and take them to the range Monday to test fire. Hopefully they eject fine so he can load up more for our match coming up!
  
Back to top
 
IP Logged
 
40-65rl
Participating Member
*
Offline



Posts: 14
Joined: Apr 4th, 2015
Re: 40-65 issues
Reply #17 - Apr 5th, 2025 at 4:03pm
Print Post  
sometimes the smallest thing can cause the biggest problems.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1 [2] 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8406 seconds.