ASSRA Forum › General › General Discussion › R 2 lovell
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic R 2 lovell (Read 528 times)
wildthing
Junior Member
**
Offline



Posts: 74
Location: Oneida,wi
Joined: Jul 7th, 2010
R 2 lovell
Mar 2nd, 2025 at 2:43pm
Print Post  
I was at a gun show this morning and picked up some brass. There was 8 cases in R 2 lovell and 5 sases of remington 25-20 ss for 15.00 dollars.  When I got home I found that the lovell cases had split necks, can this brass be used for any thing? Thought I made a good deal,guess I should have checked closer.
  
Back to top
 
IP Logged
 
Statesrights
Senior Forum Member
****
Offline



Posts: 366
Location: Virginia
Joined: May 3rd, 2016
Re: R 2 lovell
Reply #1 - Mar 2nd, 2025 at 3:11pm
Print Post  
No, but for $15 you didn’t get hurt much.
  
Back to top
 
IP Logged
 
Dellet
Frequent Elocutionist
*****
Offline



Posts: 1130
Joined: May 19th, 2017
Re: R 2 lovell
Reply #2 - Mar 2nd, 2025 at 3:50pm
Print Post  
There are a couple of 32 pistol cartridges they might work for depending on the split.

Ndnchf would probably have a use and appreciate them. 

(You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
wildthing
Junior Member
**
Offline



Posts: 74
Location: Oneida,wi
Joined: Jul 7th, 2010
Re: R 2 lovell
Reply #3 - Mar 2nd, 2025 at 3:53pm
Print Post  
this is true, just thought the cases could be cut at the neck and the body could be used for a smaller case or something,
  
Back to top
 
IP Logged
 
Dellet
Frequent Elocutionist
*****
Offline



Posts: 1130
Joined: May 19th, 2017
Re: R 2 lovell
Reply #4 - Mar 2nd, 2025 at 4:21pm
Print Post  
wildthing wrote on Mar 2nd, 2025 at 3:53pm:
this is true, just thought the cases could be cut at the neck and the body could be used for a smaller case or something,

The case can work for most of the early 32 cartridges that used a heeled bullet. These were mostly pistol. It will depend on length after trimming past the spilt.

32 Colt, long  and short. 7.6 Mauser has a couple versions that they will work for. Possibly a 32 extra long Ballard.
  
Back to top
 
IP Logged
 
bobw
Frequent Elocutionist
*****
Offline



Posts: 1718
Location: NW, Iowa
Joined: Mar 19th, 2013
Re: R 2 lovell
Reply #5 - Mar 2nd, 2025 at 6:13pm
Print Post  
Seems to me 300 rook can be made from these also.
  
Robert Warren
Back to top
 
IP Logged
 
Bent_Ramrod
Frequent Elocutionist
*****
Offline



Posts: 1498
Location: Southern Arizona
Joined: Feb 8th, 2006
Re: R 2 lovell
Reply #6 - Mar 2nd, 2025 at 6:21pm
Print Post  
.32 Colt, .32 Short and Long and (with hollow-base, inside lubricated bullet), .32 Long Rifle.

Get the lengths from Cartridges of the World.  It's handy to have a .32 Short or Long Colt revolver or a rifle in .32 Long centerfire if you have a .25-20 SS rifle, so you can recycle the split necks.
  
Back to top
 
IP Logged
 
wildthing
Junior Member
**
Offline



Posts: 74
Location: Oneida,wi
Joined: Jul 7th, 2010
Re: R 2 lovell
Reply #7 - Mar 2nd, 2025 at 6:40pm
Print Post  
A gentleman that goes by scharfe has asked for them,so I'm sending them his way.  I knew if I asked about them someone would know what they could be used for. I hate to throw out brass.  john
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2025. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6978 seconds.