ASSRA Forum - Large pistol primers For 38-55\4227 load

ASSRA Forum › General › Reloading the Single Shot Rifle › Large pistol primers For 38-55\4227 load

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Large pistol primers For 38-55\4227 load (Read 277 times)

boho Full Member Offline Posts: 196 Location: NY New York Joined: Feb 6^th, 2012	Large pistol primers For 38-55\4227 load Dec 1^st, 2024 at 6:09pm	Print Post
	I seem to have a lot of large pistol and large magnum pistol primers and very few large rifle. I used them for loading black in 38-55. That coming from the BP reloading primer by Mike Venturino and Steve Garbe. My question is how would they work on 4227? What is the difference between the large pistol an rifle.


	IP Logged

4570mike Senior Forum Member Offline Posts: 396 Location: On the Peninsula Joined: Apr 11^th, 2013	Re: Large pistol primers For 38-55\4227 load Reply #1 - Dec 1^st, 2024 at 7:11pm	Print Post
	I don't have an "educated" answer to your question, but the same dilemma. Knowing the smokeless loads in BP cases are tiny, I tried some large pistol primers and didn't get disappointing results. See the 30-30 load thread here for my results in that cartridge. I know there can be concerns about the LPP imprinting the bolt face, but have not observer any ill affects (yet). Might be due to all my rifles being modern built? FWIW, I have also used magnum primers with (moderate) smokeless loads in 38-55 with very good results. Mike.


	IP Logged

boho Full Member Offline Posts: 196 Location: NY New York Joined: Feb 6^th, 2012	Re: Large pistol primers For 38-55\4227 load Reply #2 - Dec 2^nd, 2024 at 7:00pm	Print Post
	I guess that answers my questions. Thank you


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.1690 seconds.