ASSRA Forum - 25-21 breech seated bullet mould

ASSRA Forum › General › Reloading the Single Shot Rifle › 25-21 breech seated bullet mould

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

25-21 breech seated bullet mould (Read 369 times)

Dselman Participating Member Offline Posts: 24 Joined: Jun 23^rd, 2024	25-21 breech seated bullet mould Dec 1^st, 2024 at 5:45pm	Print Post
	Does anyone have a source for .25 cal moulds that would work well for breech seating in a 25-21 Stevens 44?


	IP Logged

Bluedog Participating Member Offline Posts: 40 Joined: Jan 14^th, 2024	Re: 25-21 breech seated bullet mould Reply #1 - Dec 2^nd, 2024 at 8:10am	Print Post
	You might try cpa I got a 25 cal tapered Mos mould from them. Does well in 25-21 Jason


	IP Logged

Dselman Participating Member Offline Posts: 24 Joined: Jun 23^rd, 2024	Re: 25-21 breech seated bullet mould Reply #2 - Dec 2^nd, 2024 at 1:47pm	Print Post
	Thank you. I didn’t find them until after I made the post. But I wasn’t sure if the stock twist would stabilize a 120gr bullet


	IP Logged

Bluedog Participating Member Offline Posts: 40 Joined: Jan 14^th, 2024	Re: 25-21 breech seated bullet mould Reply #3 - Dec 2^nd, 2024 at 5:27pm	Print Post
	They shoot quite well out of a standard twist in my experience I’d bet you’ll be pleased Jason


	IP Logged

Dselman Participating Member Offline Posts: 24 Joined: Jun 23^rd, 2024	Re: 25-21 breech seated bullet mould Reply #4 - Dec 3^rd, 2024 at 12:28pm	Print Post
	What lube and alloy do you typically use?


	IP Logged

Bluedog Participating Member Offline Posts: 40 Joined: Jan 14^th, 2024	Re: 25-21 breech seated bullet mould Reply #5 - Dec 3^rd, 2024 at 10:03pm	Print Post
	30 to 1 lead tin And we use old trappers MCM lube made by northeast trade company in Pennsylvania for both smokeless and black Jason


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.9047 seconds.