ASSRA Forum - Stevens 44 .25RF action for .22LR?

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Stevens 44 .25RF action for .22LR?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Stevens 44 .25RF action for .22LR? (Read 207 times)

rnnhntr Participating Member Offline Posts: 23 Joined: May 18^th, 2014	Stevens 44 .25RF action for .22LR? Nov 30^th, 2024 at 11:14am	Print Post
	What is involved in converting a Stevens 44 .25 Rimfire for use with .22 LR besides a new extractor and barrel?


	IP Logged

Dellet Frequent Elocutionist Offline Posts: 1103 Joined: May 19^th, 2017	Re: Stevens 44 .25RF action for .22LR? Reply #1 - Nov 30^th, 2024 at 11:36am	Print Post
	Possibly the link or block. You can generally get away with one caliber change, 25 firing pin position will strike a 22. 32 will hit a 25. As long as you don’t have a 32 block it will probably work. Won’t know until you try. Or fire a 25 and measure where it would a 22.


	IP Logged

John Taylor Frequent Elocutionist Offline Posts: 1711 Location: Lewiston, ID Joined: Oct 23^rd, 2006	Re: Stevens 44 .25RF action for .22LR? Reply #2 - Nov 30^th, 2024 at 2:34pm	Print Post
	I have done a few by installing a liner in the barrel and sometime welding up the extractor or installing a new one. Wisner's has the spring loaded extractor / ejector for 22 RF.

	John Taylor Machinist/gunsmith
	WWW IP Logged

AHR Newbie Offline Posts: 3 Location: The Bitterroot Joined: Oct 10^th, 2024	Re: Stevens 44 .25RF action for .22LR? Reply #3 - Nov 30^th, 2024 at 8:02pm	Print Post
	I have a 44 with the original 22 LR and 25 RF barrels. I switch back and forth and shoot both.I only need to change the extractor, and barrel, of course

	Wayne
	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.0210 seconds.