ASSRA Forum - RB Sporting Rifle Forearm Screw Location

ASSRA Forum › General › Gunsmithing Single Shot Rifles › RB Sporting Rifle Forearm Screw Location

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

RB Sporting Rifle Forearm Screw Location (Read 132 times)

fjrdoc Participating Member Offline Posts: 21 Joined: Dec 14^th, 2019	RB Sporting Rifle Forearm Screw Location Oct 28^th, 2024 at 8:10pm	Print Post
	Hello All I finished inletting the sporting rifle forearm on my Swedish RB. I'm getting ready to drill the forearm and dovetail the forearm mounting lug onto the barrel. I'm trying to determine an appropriate location for attaching the forearm to the barrel. Pictures of original sporting rifles show the location to be closer to the tip of the forearm rather than in the middle. Is there a general consensus as to where I should place the screw and lug? Thanks in advance.


	IP Logged

marlinguy Frequent Elocutionist Offline Ballards may be weaker, but they sure are neater! Posts: 16086 Location: Oregon Joined: Feb 2^nd, 2009	Re: RB Sporting Rifle Forearm Screw Location Reply #1 - yesterday at 10:32am	Print Post
	Measuring some of my originals the forearm screws are right at 4" back from the end of the steel forearm tip. But I have one set of stocks from the 1997 run on a Roller I built up and on those Remington put the screw 3.375" back from the end.

	(You need to *Login* or *Register* to view media files and links)
	IP Logged

fjrdoc Participating Member Offline Posts: 21 Joined: Dec 14^th, 2019	Re: RB Sporting Rifle Forearm Screw Location Reply #2 - yesterday at 11:43am	Print Post
	Thanks Marlinguy. That will give me a rough idea of placement. Now I need to figure out top-dead-center on this round barrel to hand cut the dovetail. I think that I will place the barrel in a vise with the octagonal breach level and work from there.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.5263 seconds.