ASSRA Forum › General › Gunsmithing Single Shot Rifles › Large frame Martini parts
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Large frame Martini parts (Read 218 times)
jhm
Frequent Elocutionist
*****
Offline



Posts: 1453
Location: georgia
Joined: Sep 4th, 2011
Large frame Martini parts
Oct 24th, 2024 at 11:28am
Print Post  
Am looking for a source for an extractor and those tiny locking screws for the pins on a Greener shotgun action. Going to convert it to 303 British. Good idea bad idea any tips? Have had it for years and finally wanted to do something with it.



JMH
  
Back to top
 
IP Logged
 
Otony
Full Member
***
Offline



Posts: 188
Location: Bandon, Oregon
Joined: Jun 5th, 2021
Re: Large frame Martini parts
Reply #1 - Oct 24th, 2024 at 1:48pm
Print Post  
If it is the take-down action (the GP), the general consensus seems to be…no.

If it is a solid frame, I believe you are good to go.

No help on parts I’m afraid….
  
Back to top
 
IP Logged
 
4060may
Full Member
***
Offline



Posts: 177
Location: Richfield
Joined: Jul 12th, 2006
Re: Large frame Martini parts
Reply #2 - Oct 24th, 2024 at 4:13pm
Print Post  
I built one in 30-40 Krag
I think I have an extractor, not sure of the screws
take a day or so to find them

I will PM if I do
  
Back to top
 
IP Logged
 
jhm
Frequent Elocutionist
*****
Offline



Posts: 1453
Location: georgia
Joined: Sep 4th, 2011
Re: Large frame Martini parts
Reply #3 - Oct 24th, 2024 at 8:55pm
Print Post  
Thank you sir. Did you do it on the take down action which is what I have.





JMH
  
Back to top
 
IP Logged
 
4060may
Full Member
***
Offline



Posts: 177
Location: Richfield
Joined: Jul 12th, 2006
Re: Large frame Martini parts
Reply #4 - Oct 25th, 2024 at 11:05am
Print Post  
no
Back in 1983 Sarco was selling parts ones for 3/100, complete shotguns for 125.00
I was recuperating form back surgery and I friended the local gunsmith and he taught Me how to cut threads and do head space etc., I had a few GI 03 barrels, fitted one to a slug, chambered 30-40 Krag, shoots good enough to win all the local Sil matches, for 2 years then some one noticed it doesn't have a hammer so they disq. me...
triggers suck, I made a spring just strong enough to hold the trigger against the cocking lever
pictures if I remember

  
Back to top
 
IP Logged
 
4060may
Full Member
***
Offline



Posts: 177
Location: Richfield
Joined: Jul 12th, 2006
Re: Large frame Martini parts
Reply #5 - Oct 25th, 2024 at 11:08am
Print Post  
found it
PM to you
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.4576 seconds.