ASSRA Forum - Help with identifying some firing pins

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Help with identifying some firing pins

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Help with identifying some firing pins (Read 414 times)

bpjack Frequent Elocutionist Online Posts: 2758 Location: East Olympia, WA Joined: May 18^th, 2008	Help with identifying some firing pins Oct 11^th, 2024 at 6:59pm	Print Post
	Once again eBay has delivered me some mystery items. I bought a lot of firing pins which had 2 high wall ones and these three. The seller thought the top one was for a Remington and that one might be for a LC Smith. Any thoughts? Thanks Jack
	« Last Edit: Oct 11^th, 2024 at 7:23pm by bpjack »
	ASSRA # 11318 just a bit of a hoot.
	IP Logged

rodneys Oldtimer Offline Posts: 677 Location: Central Oklahoma Joined: Mar 2^nd, 2015	Re: Help with identifying some firing pins Reply #1 - Oct 16^th, 2024 at 10:30pm	Print Post
	The bottom one looks like a Worn striker Ballard


	IP Logged

rodneys Oldtimer Offline Posts: 677 Location: Central Oklahoma Joined: Mar 2^nd, 2015	Re: Help with identifying some firing pins Reply #2 - Oct 16^th, 2024 at 10:36pm	Print Post
	Yours looks to be a Centerfire version


	IP Logged

bpjack Frequent Elocutionist Online Posts: 2758 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Help with identifying some firing pins Reply #3 - Oct 16^th, 2024 at 11:42pm	Print Post
	Unfortunately it looks more like this. Not sure if the Sterling one is hollow though. (You need to *Login* or *Register* to view media files and links) Jack

	ASSRA # 11318 just a bit of a hoot.
	IP Logged

rodneys Oldtimer Offline Posts: 677 Location: Central Oklahoma Joined: Mar 2^nd, 2015	Re: Help with identifying some firing pins Reply #4 - Oct 17^th, 2024 at 10:16am	Print Post
	Aww , I think you’re correct, but it sure has similarities. It is much smaller I noticed in diameter than the Worn.


	IP Logged

bpjack Frequent Elocutionist Online Posts: 2758 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Help with identifying some firing pins Reply #5 - Oct 17^th, 2024 at 1:06pm	Print Post
	It would be worth more I assume if it were for a Ballard. I will probably put them back on eBay and see what happens. The lot I won had 2 high wall pins One standard one that looks new and the other a large tip pin that was machined to work for both versions of the breech block, the one with the pin retaining screw and the earlier one with a horizontal cross pin. I will put these 2 on here for sale first just in case but the larger eBay exposure is more likely to find a buyer. Thanks Rodney Jack

	ASSRA # 11318 just a bit of a hoot.
	IP Logged

calledflyer Frequent Elocutionist Offline Posts: 3565 Joined: Mar 9^th, 2015	Re: Help with identifying some firing pins Reply #6 - Oct 17^th, 2024 at 4:45pm	Print Post
	jack, make me a price on the fat-pin one. I have been hoping to find one. just in case after lo-these-many-years.


	IP Logged

bpjack Frequent Elocutionist Online Posts: 2758 Location: East Olympia, WA Joined: May 18^th, 2008	Re: Help with identifying some firing pins Reply #7 - Oct 17^th, 2024 at 5:14pm	Print Post
	I will keep you in mind buy I bought it for someone else. I am pretty sure his new auction find has the cross pin large tip firing pin. He hasn't had a change to take it apart yet as he is out of town. Are you looking for a fat tip one or a cross pin one?

	ASSRA # 11318 just a bit of a hoot.
	IP Logged

calledflyer Frequent Elocutionist Offline Posts: 3565 Joined: Mar 9^th, 2015	Re: Help with identifying some firing pins Reply #8 - Oct 17^th, 2024 at 6:49pm	Print Post
	fat tip, (vertical) top screw. lemme know and we'll get this sorted out.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.5786 seconds.