ASSRA Forum › General › Gunsmithing Single Shot Rifles › Remodel BSA Martini?
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: [1] 2  Send TopicPrint
Hot Topic (More than 10 Replies) Remodel BSA Martini? (Read 930 times)
SchwarzStock
Frequent Elocutionist
*****
Offline



Posts: 1161
Location: SchwarzWald
Joined: Mar 23rd, 2010
Remodel BSA Martini?
Oct 10th, 2024 at 4:56am
Print Post  
I have been looking for a 22 for a bit since my son "inherited" my CZ 452HB. Honestly, he had fired it much more than I so I thought I would just give it to him now so he has a good gun to go with his buddies on their jack hunts in the AZ desert.

Anyway, I need a replacement and haven't found anything that trips my trigger so to speak. I want something I can walk with and also use for club shoots. I have noticed there are a lot of ads for used BSA international rifles at decent prices. Of course as they are stocked they are not something to walk with. I am thinking I would repalce/remodel the stocks, shorten the barrel to 20-21 inches, remount the front sight base, and install a scope. I would use the scope for hunting and use the irons for shooting at the Verein.

Has anyone modified one of these for use as a hunting rifle?
  
If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
Back to top
 
IP Logged
 
J.Francis
Full Member
***
Offline



Posts: 150
Location: Pownal, Vermont
Joined: Nov 20th, 2011
Re: Remodel BSA Martini?
Reply #1 - Oct 10th, 2024 at 6:50am
Print Post  
Sounds like a lot of work-you might be able to get what you want with an earlier BSA martini. The models 8 and 13 come to mind. You can check out the entire BSA line and a host of other 22 lr target rifles on ukrifleman.org. An added bonus is the earlier BSA models sell for close to half of what an International sells for. Good luck on your search.
  
Back to top
 
IP Logged
 
gnoahhh
Oldtimer
*****
Offline



Posts: 807
Location: Gaithersburg, MD
Joined: Mar 31st, 2010
Re: Remodel BSA Martini?
Reply #2 - Oct 10th, 2024 at 7:56am
Print Post  
I'll second the motion for an earlier BSA. A Model 12, 12/15, or 15 will fill the bill as-is without any serious modifications. While not exactly featherweight they aren't objectionable to carry, at least I don't think so. If you can manage a scoped Model 70 or a Springfield all day you can manage one of these. On top of that they tend to be wonderfully accurate with good triggers - you'll be competitive in club shooting.
  
Back to top
 
IP Logged
 
SchwarzStock
Frequent Elocutionist
*****
Offline



Posts: 1161
Location: SchwarzWald
Joined: Mar 23rd, 2010
Re: Remodel BSA Martini?
Reply #3 - Oct 10th, 2024 at 8:16am
Print Post  
J.Francis wrote on Oct 10th, 2024 at 6:50am:
 
ukrifleman.org.


I can't find this on the internet
  
If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
Back to top
 
IP Logged
 
SchwarzStock
Frequent Elocutionist
*****
Offline



Posts: 1161
Location: SchwarzWald
Joined: Mar 23rd, 2010
Re: Remodel BSA Martini?
Reply #4 - Oct 10th, 2024 at 9:24am
Print Post  
What model is this?
  
If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
Back to top
 
IP Logged
 
silver
Full Member
***
Offline



Posts: 199
Location: Central wi,
Joined: Sep 20th, 2016
Re: Remodel BSA Martini?
Reply #5 - Oct 10th, 2024 at 10:47am
Print Post  
That is a international mark 3 . If looking at one of those 
Styles I would go with mark 2. Thayer are available with either 
25” or 29” factory barrels. Very accurate. But not the lightest 
Models available. The 12 or 15 is definitely lighter.
  
Back to top
 
IP Logged
 
SchwarzStock
Frequent Elocutionist
*****
Offline



Posts: 1161
Location: SchwarzWald
Joined: Mar 23rd, 2010
Re: Remodel BSA Martini?
Reply #6 - Oct 10th, 2024 at 11:14am
Print Post  
Most of the used Internationals are priced about $800. I have seen a couple of left hand versions at $450 and the Mark 3 is $475.

The auction for the Vickers-Armstrong is still at 1 bid (about $1.10) and ends Sunday....
  
If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
Back to top
 
IP Logged
 
J.Francis
Full Member
***
Offline



Posts: 150
Location: Pownal, Vermont
Joined: Nov 20th, 2011
Re: Remodel BSA Martini?
Reply #7 - Oct 10th, 2024 at 9:11pm
Print Post  
SchwarzStock,
      Try (You need to Login or Register to view media files and links)
  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4041
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: Remodel BSA Martini?
Reply #8 - Oct 11th, 2024 at 8:03am
Print Post  
BSA Martini International MKII with a 22 LR RKS gain twist bull barrel.

Extension bloop tube to extend sight radius to use Anschutz sights.

8 to 30X Bausch & Lomb scope with sunshade on 3/8" dovetail base.
« Last Edit: Oct 11th, 2024 at 10:08am by Schuetzendave »  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4041
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: Remodel BSA Martini?
Reply #9 - Oct 11th, 2024 at 10:07am
Print Post  
BSA Model 4 .310 Cadet rebarrelled to .218 Bee with Bausch & Lomb 4X scope for hunting small game.

3/8" dovetail base allows me to use either a scope or Anschutz sights.

.218 Bee Loads:

50 grain Speer HP "TNT"
12.7 grains H4198 2,442 fps

52 grain Sierra HP Match
13.1 grains H4198 2,510 fps
« Last Edit: Oct 12th, 2024 at 11:12am by Schuetzendave »  
Back to top
 
IP Logged
 
SchwarzStock
Frequent Elocutionist
*****
Offline



Posts: 1161
Location: SchwarzWald
Joined: Mar 23rd, 2010
Re: Remodel BSA Martini?
Reply #10 - Oct 11th, 2024 at 10:31am
Print Post  
Scheutzendave: Did you modify the buttstock?
  
If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
Back to top
 
IP Logged
 
Old-Win
Frequent Elocutionist
*****
Offline



Posts: 1670
Location: Minnesota
Joined: Nov 24th, 2005
Re: Remodel BSA Martini?
Reply #11 - Oct 11th, 2024 at 11:10am
Print Post  
Some of the Aussie boys have posted pictures of beautiful rifles that they have built on the smaller Martini actions. I think Aussie_Hunter may be one. Somebody else comes to mind but I can't think of his name. Maybe  somebody else remembers. Go to Rifle Photos and scroll through that.Singleshotsam has a beauty.
« Last Edit: Oct 11th, 2024 at 11:20am by Old-Win »  
Back to top
 
IP Logged
 
chipmaker
Senior Forum Member
****
Offline



Posts: 339
Location: san diego
Joined: Sep 24th, 2007
Re: Remodel BSA Martini?
Reply #12 - Oct 11th, 2024 at 12:11pm
Print Post  
SS
If you decide to use a BSA International, I'd recommend the Mark 2. It has the threaded action and easy trigger adjustment. Attached is a photo of one with a barrel extension attached to a 20" Anschutz barrel.
The downside of the International sporting rifle is it's weight. A plus is the ejector.
Of the small sized Martini actions, I think that the BSA Cadet actions are your best bet. They use the Francotte patent inner frame, which makes takedown for cleaning easier, than the small standard Martini. They will require a little more work to achieve International level accuracy but are light in weight.
Otto
  
Back to top
 
IP Logged
 
Schuetzendave
Frequent Elocutionist
*****
Offline


Retired Ex-Shooter

Posts: 4041
Location: St. Albert, Alberta
Joined: Jan 28th, 2005
Re: Remodel BSA Martini?
Reply #13 - Oct 11th, 2024 at 1:09pm
Print Post  
I have the original stocks on my two BSA Martini rifles.

You can obtain inletted stock blanks from CPA Rifles:

(You need to Login or Register to view media files and links)

or Cottage Crafts:

(You need to Login or Register to view media files and links)

or Gun Stocks Inc.:

(You need to Login or Register to view media files and links)

or Rebel Gunworks:

(You need to Login or Register to view media files and links)



« Last Edit: Oct 11th, 2024 at 1:35pm by Schuetzendave »  
Back to top
 
IP Logged
 
SchwarzStock
Frequent Elocutionist
*****
Offline



Posts: 1161
Location: SchwarzWald
Joined: Mar 23rd, 2010
Re: Remodel BSA Martini?
Reply #14 - Oct 11th, 2024 at 2:03pm
Print Post  
THXXX Cool

A possible donor

(You need to Login or Register to view media files and links)
  
If your rifle is not in 7.62 and you can't hit what you are aiming at with de-linked machinegun ammo you are a pretender.
Back to top
 
IP Logged
 
Page Index Toggle Pages: [1] 2 
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.2628 seconds.