ASSRA Forum › General › Gunsmithing Single Shot Rifles › Stevens 44 1/2 firing pin
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Stevens 44 1/2 firing pin (Read 676 times)
Dselman
Participating Member
*
Offline



Posts: 18
Joined: Jun 23rd, 2024
Stevens 44 1/2 firing pin
Sep 1st, 2024 at 8:41am
Print Post  
Does anyone have a picture of a rimfire firing pin for a Stevens 44 1/2 ?   Mine has frequent miss fire and the firing pin has a rounded tip much like most center fires.  Is this correct or is supposed to be flat like most rim fire pins?
  
Back to top
 
IP Logged
 
Sure shot
Oldtimer
*****
Offline



Posts: 890
Location: East central Iowa
Joined: Jun 22nd, 2020
Re: Stevens 44 1/2 firing pin
Reply #1 - Sep 1st, 2024 at 9:35am
Print Post  
My original 44 1/2  .22 rimfire breech block firing pin is flat. I find that many .22 Stevens rifles have a rounded firing pin tip.
  
Back to top
 
IP Logged
 
SouthRoader
Newbie
*
Offline



Posts: 2
Joined: Jul 12th, 2024
Re: Stevens 44 1/2 firing pin
Reply #2 - Sep 1st, 2024 at 10:14am
Print Post  
Definately not round
  
Back to top
 
IP Logged
 
bobw
Frequent Elocutionist
*****
Offline



Posts: 1415
Location: NW, Iowa
Joined: Mar 19th, 2013
Re: Stevens 44 1/2 firing pin
Reply #3 - Sep 1st, 2024 at 11:31am
Print Post  
SouthRoader wrote on Sep 1st, 2024 at 10:14am:
Definately not round


Is this a Stevens 44 1/2 pin?   
Bob
  
Robert Warren
Back to top
 
IP Logged
 
Sure shot
Oldtimer
*****
Offline



Posts: 890
Location: East central Iowa
Joined: Jun 22nd, 2020
Re: Stevens 44 1/2 firing pin
Reply #4 - Sep 1st, 2024 at 1:52pm
Print Post  
A quick look on CPA's website reveals that they have new rimfire firing pins for original Stevens 44 1/2's for $20.
  
Back to top
 
IP Logged
 
SouthRoader
Newbie
*
Offline



Posts: 2
Joined: Jul 12th, 2024
Re: Stevens 44 1/2 firing pin
Reply #5 - Sep 1st, 2024 at 8:01pm
Print Post  
Is this a Stevens 44 1/2 pin?  
Bob [/quote]

It was provided with the CPA 44 1/2 I purchased in 1999.
  
Back to top
 
IP Logged
 
Dselman
Participating Member
*
Offline



Posts: 18
Joined: Jun 23rd, 2024
Re: Stevens 44 1/2 firing pin
Reply #6 - Sep 2nd, 2024 at 6:50am
Print Post  
Thanks everybody.  It looks like my suspicions were correct.  I’m not sure why I didn’t think about cpa.  I’ve already made one order from them to get front and rear sights.
  
Back to top
 
IP Logged
 
Sure shot
Oldtimer
*****
Offline



Posts: 890
Location: East central Iowa
Joined: Jun 22nd, 2020
Re: Stevens 44 1/2 firing pin
Reply #7 - Sep 2nd, 2024 at 10:58am
Print Post  
You might also try turning in the mainspring tension screw on the lower tang to increase the power of the mainspring,it might help with the fail to fire issues.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.6862 seconds.