ASSRA Forum - Target loads for 38-55 with heavy bullets?

ASSRA Forum › General › Reloading the Single Shot Rifle › Target loads for 38-55 with heavy bullets?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Target loads for 38-55 with heavy bullets? (Read 627 times)

oneatatime Frequent Elocutionist Offline Posts: 3912 Location: Rocky Mountains Joined: Oct 30^th, 2011	Target loads for 38-55 with heavy bullets? Aug 29^th, 2024 at 5:17pm	Print Post
	Anyone have some with 275 plus grain bullets?


	IP Logged

frnkeore Frequent Elocutionist Offline Posts: 7323 Location: Central Point, OR 97502 Joined: Jun 16^th, 2010	Re: Target loads for 38-55 with heavy bullets? Reply #1 - Aug 29^th, 2024 at 6:10pm	Print Post
	We'll need to know your groove diameter. The old groove was .380+ and the new (not really new, it's the 375 H&H) groove of .375.

	ASSRA Member #696, ISSA Member #339
	YIM AIM IP Logged

nuclearcricket Oldtimer Offline Posts: 758 Joined: Oct 15^th, 2008	Re: Target loads for 38-55 with heavy bullets? Reply #2 - Aug 29^th, 2024 at 8:14pm	Print Post
	With black powder a charge of 45-47 gr of 1 1/2 swiss and a 310 to 320 gr bullet will do quite well for up to 500M or so. A postel style bullet is good for longer range. If you can find one the Hoch tapered bullet is pretty good out to 300M. Sam


	IP Logged

Hornetb Newbie Offline Posts: 9 Joined: Mar 24^th, 2015	Re: Target loads for 38-55 with heavy bullets? Reply #3 - Aug 29^th, 2024 at 9:50pm	Print Post
	360gr BACO bullet out of a 1:12 twist Pedersoli with 15grs 4227. Same bullet with 49gr Swiss 1.5Fg Both extremely accurate out to 500m in my rifle. You'll need a 1:12 twist though. I've read similar loads with the 330gr offerings too.


	IP Logged

oneatatime Frequent Elocutionist Offline Posts: 3912 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: Target loads for 38-55 with heavy bullets? Reply #4 - Aug 30^th, 2024 at 1:12am	Print Post
	Thanks, all. I should have specified for use at 200 meters.


	IP Logged

RSW Frequent Elocutionist Offline Posts: 1193 Location: Arizona Joined: Sep 8^th, 2006	Re: Target loads for 38-55 with heavy bullets? Reply #5 - Aug 30^th, 2024 at 1:25pm	Print Post
	A load of 15.0-18.0gr SR4759 (if you have any) or 15.0-17.0gr IMR4227 (with LR primers) for 200yd shooting has always worked well for me using bullets in the weight range you stated. If you are shooting a Ballard, reduce powder charge by 1.0gr from my stated loads. Most accurate load for your particular rifle will obviously need to be determined by load development. Black powder or duplex is a whole 'nuther animal. For straight black powder loads, nuclearcricket's load stated in his response is a good place to start.

	Randy W ASSRA 10211 - ISSA 125 There are indeed two Americas. Simply put, it is not the haves and have nots. The two Americans are in reality divided into those who do and those who don't.
	WWW IP Logged

oneatatime Frequent Elocutionist Offline Posts: 3912 Location: Rocky Mountains Joined: Oct 30^th, 2011	Re: Target loads for 38-55 with heavy bullets? Reply #6 - Aug 30^th, 2024 at 1:37pm	Print Post
	Thanks, Randy. I still have a good supply of 4759 and a lot of 4227 so I will start in your suggest ranges. No problem with rifle strength.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.3376 seconds.