ASSRA Forum - ASSRA Match Rules - Bullets and Rifles

ASSRA Forum › General › General Discussion › ASSRA Match Rules - Bullets and Rifles

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

ASSRA Match Rules - Bullets and Rifles (Read 483 times)

wellaimed Newbie Offline Posts: 2 Joined: Jul 29^th, 2024	ASSRA Match Rules - Bullets and Rifles Jul 30^th, 2024 at 11:35am	Print Post
	Looking for rule clarifications. New to this discipline. ASSRA match rules require lead bullets. Do coated lead bullets such as those sold by Missouri Bullet Company or ACME meet this requirement? Rule seems to focus on precluding gas checks and metallic jackets. Section 2.01 - Bullets must be of lead or lead alloy… Can Thompson Center single shot break action rifles be used in an ASSRA match (other than in the Traditional Class)?


	IP Logged

JHand Participating Member Offline Posts: 49 Joined: Apr 15^th, 2024	Re: ASSRA Match Rules - Bullets and Rifles Reply #1 - Jul 30^th, 2024 at 12:11pm	Print Post
	As far as the powder coating, I was told the bullets must be bare lead, with no coating of any kind. That may be a "spirit of the rule" though as I don't think they have been updated for powder coating, which is fairly new for shooting


	IP Logged

Jeff_Schultz ASSRA Board Member Offline Posts: 1606 Location: Ransomville, NY Joined: Apr 25^th, 2004	Re: ASSRA Match Rules - Bullets and Rifles Reply #2 - Jul 30^th, 2024 at 12:14pm	Print Post
	Thompson Center break actions are fine. The coated bullets are not.

	"We have met the enemy and he is us." Pogo “There is no situation so bad that it cannot be made worse." Confidence- The feeling you get before you fully understand the situation.
	IP Logged

Jeff_Schultz ASSRA Board Member Offline Posts: 1606 Location: Ransomville, NY Joined: Apr 25^th, 2004	Re: ASSRA Match Rules - Bullets and Rifles Reply #3 - Jul 30^th, 2024 at 12:24pm	Print Post
	JHand wrote on Jul 30^th, 2024 at 12:11pm: As far as the powder coating, I was told the bullets must be bare lead, with no coating of any kind. That may be a "spirit of the rule" though as I don't think they have been updated for powder coating, which is fairly new for shooting I don't know who told you they had to be bare lead; materials like Lee liquid alox are allowed. What is not allowed is the plastic/polymer/powder coat stuff.

	"We have met the enemy and he is us." Pogo “There is no situation so bad that it cannot be made worse." Confidence- The feeling you get before you fully understand the situation.
	IP Logged

wellaimed Newbie Offline Posts: 2 Joined: Jul 29^th, 2024	Re: ASSRA Match Rules - Bullets and Rifles Reply #4 - Jul 31^st, 2024 at 10:29pm	Print Post
	Jeff_Schultz wrote on Jul 30^th, 2024 at 12:14pm: Thompson Center break actions are fine. The coated bullets are not. Thank you for the quick and clear answer.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.7889 seconds.