ASSRA Forum - Peregrine Action Assembly/disassembly

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Peregrine Action Assembly/disassembly

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Peregrine Action Assembly/disassembly (Read 433 times)

Gerald Participating Member Offline Posts: 23 Location: minnesota Joined: Aug 14^th, 2015	Peregrine Action Assembly/disassembly Jul 17^th, 2024 at 6:32am	Print Post
	Good day, Does anyone have instructions/directions for this action? I have two and would love the basics on removing the breach block and reinstalling in print that I can reference? I would cover and reproduction costs. Thank in advance for any help.


	IP Logged

Green_Frog Frequent Elocutionist Offline "It ain't easy being green" ASSRA Life #281 Posts: 3990 Location: Lynchburg, VA Joined: Apr 18^th, 2004	Re: Peregrine Action Assembly/disassembly Reply #1 - Jul 17^th, 2024 at 11:58am	Print Post
	There was a member on here who knew the designer/maker of the Peregrine action well who was assembling information of the source you need. I’ll give you a free bump. One piece of info I’d like to know is how to tell a large action from a small one if you don’t have both to compare. Froggie


	IP Logged

sportslube Oldtimer Offline Posts: 532 Location: Eau Claire, wi Joined: May 13^th, 2008	Re: Peregrine Action Assembly/disassembly Reply #2 - Jul 17^th, 2024 at 1:22pm	Print Post
	It will say 33. Or 033 on the action Gerald. Give me a call. Bill/sportslube


	IP Logged

Gerald Participating Member Offline Posts: 23 Location: minnesota Joined: Aug 14^th, 2015	Re: Peregrine Action Assembly/disassembly Reply #3 - Jul 18^th, 2024 at 7:25am	Print Post
	Thanks Bill, Will give you a call. Gerald


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 0.8343 seconds.