ASSRA Forum › General › Collecting Single Shot Rifles › Stevens Receiver Marking
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Stevens Receiver Marking (Read 185 times)
4570mike
Senior Forum Member
****
Offline



Posts: 378
Location: On the Peninsula
Joined: Apr 11th, 2013
Stevens Receiver Marking
Jul 16th, 2024 at 4:54pm
Print Post  
I had this on the another thread, but little response.
This is the receiver face of a Stevens 414 Armory Rifle.
It is marked with a large "S" instead of a model number.
Any guess what it may mean?
Thanks,
Mike.
  
Back to top
 
IP Logged
 
Sure shot
Oldtimer
*****
Offline



Posts: 886
Location: East central Iowa
Joined: Jun 22nd, 2020
Re: Stevens Receiver Marking
Reply #1 - Jul 16th, 2024 at 7:04pm
Print Post  
I don't know what the "S" stamping means.  The late production rifles had the model number stamped on the lower tang. Does this 414 have the model number stamped on the lower tang?
  
Back to top
 
IP Logged
 
4570mike
Senior Forum Member
****
Offline



Posts: 378
Location: On the Peninsula
Joined: Apr 11th, 2013
Re: Stevens Receiver Marking
Reply #2 - Jul 17th, 2024 at 10:44am
Print Post  
Sure shot wrote on Jul 16th, 2024 at 7:04pm:
I don't know what the "S" stamping means.  The late production rifles had the model number stamped on the lower tang. Does this 414 have the model number stamped on the lower tang?


Yes, its marked "414" along with the serial number.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.0674 seconds.