ASSRA Forum - 357 magnum on martini cadet action

ASSRA Forum › General › Reloading the Single Shot Rifle › 357 magnum on martini cadet action

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

357 magnum on martini cadet action (Read 488 times)

cdnrokon Full Member Offline Posts: 110 Location: Winnipeg,Manitoba Canada Joined: Feb 27^th, 2016	357 magnum on martini cadet action May 2^nd, 2023 at 6:10pm	Print Post
	reading on line the cup rating is 40,000 ??? Looking for starting loads with the 180 gr Hornady xtp I have H110 , LilGun,4227, and unique to play with barrel is a 1/16 twist 20" long GM barrel


	IP Logged

1isenough Full Member Offline Posts: 202 Location: Louisville, KY Joined: Dec 28^th, 2017	Re: 357 magnum on martini cadet action Reply #1 - May 2^nd, 2023 at 10:45pm	Print Post
	Good timing! Earlier this spring I finish making a new barrel for one of my Cadet actions using a TJ's liner, chambered for 357 Mag with a 1:16 twist. One of the bullets I tested last week was the 180gr XTP, and the two best loads were 14.5gr of LilGun and 11.8gr of 2400. Try the 125gr Berry's plated bullets too. They shot pretty well for me using 7.2g of HS6 and 16.8gr of IMR4198 Good luck!.


	IP Logged

gnoahhh Oldtimer Offline Posts: 807 Location: Annapolis, MD Joined: Mar 31^st, 2010	Re: 357 magnum on martini cadet action Reply #2 - May 4^th, 2023 at 3:53pm	Print Post
	1isenough wrote on May 2^nd, 2023 at 10:45pm: Good timing! Earlier this spring I finish making a new barrel for one of my Cadet actions using a TJ's liner, chambered for 357 Mag with a 1:16 twist. One of the bullets I tested last week was the 180gr XTP, and the two best loads were 14.5gr of LilGun and 11.8gr of 2400. Try the 125gr Berry's plated bullets too. They shot pretty well for me using 7.2g of HS6 and 16.8gr of IMR4198 Good luck!. Those loads tally closely to what I was doing with a .357 Magnum Cadet.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›

Page completed in 1.2742 seconds.