ASSRA Forum - Shaver Insert for a .38 cal. Remington # 2?

ASSRA Forum › General › Gunsmithing Single Shot Rifles › Shaver Insert for a .38 cal. Remington # 2?

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Pages: 1

Shaver Insert for a .38 cal. Remington # 2? (Read 1160 times)

MrTipUp Frequent Elocutionist Offline Quality is to a product what character is to a man Posts: 1310 Location: Indiana Joined: Feb 19^th, 2020	Shaver Insert for a .38 cal. Remington # 2? Apr 27^th, 2023 at 12:11pm	Print Post
	I think I recall that Lee Shaver will on special order make one of his .22 LR inserts to fit a .38 caliber barrel. If so, would it be possible to use said insert in a .38 RF Remington # 2? Bill Lawrence


	IP Logged

ndnchf Frequent Elocutionist Online Posts: 1052 Joined: Mar 6^th, 2014	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #1 - Apr 27^th, 2023 at 1:36pm	Print Post
	.38 rimfire nominally has a .375" groove diameter, while .357" is the modern .38 cal groove size. So I would think the OD of the insert would need to be custom made. The question is best posed to Mr. Shaver.


	IP Logged

awp101 Full Member Offline Posts: 153 Location: DFW Joined: Jan 31^st, 2007	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #2 - Jan 14^th, 2024 at 10:11am	Print Post
	MrTipUp wrote on Apr 27^th, 2023 at 12:11pm: I think I recall that Lee Shaver will on special order make one of his .22 LR inserts to fit a .38 caliber barrel. If so, would it be possible to use said insert in a .38 RF Remington # 2? Bill Lawrence Mr Lawrence, did you ever find out if this is possible? I was searching to see if anyone had tried one of Mr Shaver's .38-55 inserts and this thread came up.

	The Wheels of Justification grind slowly but inexorably
	IP Logged

art_ruggiero Frequent Elocutionist Offline Posts: 1090 Location: CT Joined: Dec 14^th, 2008	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #3 - Jan 15^th, 2024 at 7:35am	Print Post
	his inserts work great ask him about custom designs art


	IP Logged

awp101 Full Member Offline Posts: 153 Location: DFW Joined: Jan 31^st, 2007	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #4 - Jan 15^th, 2024 at 8:05am	Print Post
	Thanks, I think an email to him should be on my list of things to do today.

	The Wheels of Justification grind slowly but inexorably
	IP Logged

MrTipUp Frequent Elocutionist Offline Quality is to a product what character is to a man Posts: 1310 Location: Indiana Joined: Feb 19^th, 2020	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #5 - Jan 15^th, 2024 at 8:35am	Print Post
	Mr Lawrence, did you ever find out if this is possible? Unfortunately, several very expensive emergencies finished out 2023, so it will be a while before I've the wherewithal to make an inquiry practical. But I will do it. simply because I've neither the tools nor the patience to make my own .38RF cartridges. And I will report back here once I know. Bill Lawrence


	IP Logged

awp101 Full Member Offline Posts: 153 Location: DFW Joined: Jan 31^st, 2007	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #6 - Jan 15^th, 2024 at 8:50am	Print Post
	Thanks and sorry to hear that! I hate it when real life gets in the way of a good time! I don't see an email listed on the website so it looks like a call is in order sometime this week. I need to price a .38-55 insert, a shorter than normal .45-70 insert (22" barrel) and I'll do my best to remember to ask him about the possibility of .38RF.

	The Wheels of Justification grind slowly but inexorably
	IP Logged

kootne Senior Forum Member Offline Posts: 440 Location: Libby, Mt. Joined: Mar 6^th, 2012	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #7 - Jan 15^th, 2024 at 10:53am	Print Post
	He made one for me a few years back. 9.3x47R near as we could tell. I sent him a chamber casting and he made it up. Worked fine. 9.3 is a few thou smaller than a 38.

	You can't make good decisions without good information.
	IP Logged

MrTipUp Frequent Elocutionist Offline Quality is to a product what character is to a man Posts: 1310 Location: Indiana Joined: Feb 19^th, 2020	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #8 - Jan 16^th, 2024 at 11:25am	Print Post
	For those who are interested, a very kind fellow member has contacted Mr. Shaver for me and, no, because of dimension-related restrictions, the .38RF is NOT a candidate for one of his adapters. Bill Lawrence


	IP Logged

bobw Frequent Elocutionist Offline Posts: 1498 Location: NW, Iowa Joined: Mar 19^th, 2013	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #9 - Jan 16^th, 2024 at 12:43pm	Print Post
	Bill, If you want to shoot it as the 38 rimfire, I can send you a few 38 special case made into 38 long rimfire. You or I would need to trim the brass if your #2 a 38 short. I would send some 125 grain heeled bullets and 22 blanks also. Steve has me using 3.5 to 3.8 grains of Unique. Bob

	Robert Warren
	IP Logged

ssdave Frequent Elocutionist Offline Posts: 1799 Location: Eastern Oregon Joined: Apr 16^th, 2004	Re: Shaver Insert for a .38 cal. Remington # 2? Reply #10 - Jan 16^th, 2024 at 1:28pm	Print Post
	A .22 rf insert for a #2 RB should be simplistic. An 8mm OD liner, a few pieces of shink wrap electrical insulation shrunk on to space it to the barrel, a very thin chamber fitting sleeve locktited to the chamber end, and chamber and headspace for .22 lr. If the 38 cal rf firing pin won't hit, would need to make a new breechblock in .22 rf. I've fired many thousands of rounds of .22 rf through my .45-90 rolling block, just pry the cases out of the liner with a small screwdriver. I switch in a .22 rf breech block to use it.


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›