ASSRA Forum - 25-20 Singleshot pet loads

ASSRA Forum › General › Reloading the Single Shot Rifle › 25-20 Singleshot pet loads

(Moderator Group: Moderator)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: [1] 2

Hot Topic (More than 10 Replies)

25-20 Singleshot pet loads (Read 2318 times)

Shanghai Jack Participating Member Offline Posts: 43 Location: texas Joined: Apr 6^th, 2014	25-20 Singleshot pet loads Mar 5^th, 2023 at 12:21pm	Print Post
	Any pet loads for 25-20 single shot - not 25-20 WCF. Thanks


	IP Logged

westerner Frequent Elocutionist Offline deleted posts and threads record holder. Posts: 11451 Location: Why, out West of course Joined: May 29^th, 2006	Re: 25-20 Singleshot pet loads Reply #1 - Mar 5^th, 2023 at 1:36pm	Print Post
	8gr 4227. 120gr Mos.

	A blind squirrel runs into a tree every once in a while.
	IP Logged

bpjack Frequent Elocutionist Offline Posts: 2732 Location: East Olympia, WA Joined: May 18^th, 2008	Re: 25-20 Singleshot pet loads Reply #2 - Mar 5^th, 2023 at 1:43pm	Print Post
	In a 14 twist original Stevens 44 I use 7.7 gr of 4227 with an 85gr RCBS bullet in #2 alloy.

	ASSRA # 11318 just a bit of a hoot.
	IP Logged

Cat_Whisperer Frequent Elocutionist Offline No 1, 9.3x74R Posts: 3877 Location: Mountains of Virginia Joined: Apr 17^th, 2004	Re: 25-20 Singleshot pet loads Reply #3 - Mar 8^th, 2023 at 5:52pm	Print Post
	Fixed or breach seated??

	Cat Whisperer (trk) Chief of Smoke Pulaski Coehorn Works and Skunk Works Drafted May 1970, Retired Maj. U.S.Army assra #9885
	WWW IP Logged

ndnchf Frequent Elocutionist Offline Posts: 1027 Joined: Mar 6^th, 2014	Re: 25-20 Singleshot pet loads Reply #4 - Mar 9^th, 2023 at 3:17pm	Print Post
	Speaking of loads, does anyone recognize this headstamp? I was looking over my .25-20SS brass. Most of it is Jamison, but there are a few of these mixed in too. I was wondering who made them.


	IP Logged

JerryH Frequent Elocutionist Offline ASSRA Member #10876 Posts: 1240 Location: Easton, CA Joined: Nov 9^th, 2014	Re: 25-20 Singleshot pet loads Reply #5 - Mar 9^th, 2023 at 3:40pm	Print Post
	That's Bertram brass in the picture above.

	I'm not a complete idiot, some of my parts are missing.
	IP Logged

ndnchf Frequent Elocutionist Offline Posts: 1027 Joined: Mar 6^th, 2014	Re: 25-20 Singleshot pet loads Reply #6 - Mar 9^th, 2023 at 3:55pm	Print Post
	JerryH wrote on Mar 9^th, 2023 at 3:40pm: That's Bertram brass in the picture above. Ok, thanks Jerry!


	IP Logged

Cbashooter Frequent Elocutionist Online Posts: 1568 Location: Eastern Wa. Joined: Mar 31^st, 2018	Re: 25-20 Singleshot pet loads Reply #7 - Mar 9^th, 2023 at 10:17pm	Print Post
	didn't the Kangaroo headstamp give it away!! It took me like 10 years to realize that was a kangaroo, shows how smart I am.


	IP Logged

ndnchf Frequent Elocutionist Offline Posts: 1027 Joined: Mar 6^th, 2014	Re: 25-20 Singleshot pet loads Reply #8 - Mar 10^th, 2023 at 5:38am	Print Post
	Cbashooter wrote on Mar 9^th, 2023 at 10:17pm: didn't the Kangaroo headstamp give it away!! It took me like 10 years to realize that was a kangaroo, shows how smart I am. Now that you mention it, I can see the kangaroo. I thought it looked like Aladdin's lamp


	IP Logged

waterman Frequent Elocutionist Offline Posts: 2831 Location: Behind the Redwood Curtain Joined: Jun 9^th, 2004	Re: 25-20 Singleshot pet loads Reply #9 - Mar 10^th, 2023 at 1:34pm	Print Post
	If you have any of that Bertram brass (or the even older BELL brass), anneal before loading. They will probably crack or split if you don't.


	IP Logged

ndnchf Frequent Elocutionist Offline Posts: 1027 Joined: Mar 6^th, 2014	Re: 25-20 Singleshot pet loads Reply #10 - Mar 10^th, 2023 at 1:39pm	Print Post
	waterman wrote on Mar 10^th, 2023 at 1:34pm: If you have any of that Bertram brass (or the even older BELL brass), anneal before loading. They will probably crack or split if you don't. I'll definitely anneal all my brass, regardless of brand. I have some old, large primer, nickel plated W.R.A brass, as well as the Jamison and Bertram. Certainly a mix, but glad to have it


	IP Logged

ndnchf Frequent Elocutionist Offline Posts: 1027 Joined: Mar 6^th, 2014	Re: 25-20 Singleshot pet loads Reply #11 - Mar 30^th, 2023 at 8:37pm	Print Post
	I just picked up this old 86gr Ideal 25720 mold. The cavity appears to be fine and it closes well. I had to replace the missing alignment pin. Its ready to go to work now I've got a variety of .25-20SS load data, this should be a good builet to start with in my #2 rolling block with 1-13 rwist. But I'm all ears for suggestions - but nothing too hot 🔥


	IP Logged

oregonian Participating Member Offline Posts: 16 Joined: Sep 30^th, 2018	Re: 25-20 Singleshot pet loads Reply #12 - Apr 21^st, 2023 at 2:44pm	Print Post
	I need load help for 25-20 SS 10 twist. Thanks


	IP Logged

uscra112 Frequent Elocutionist Offline Posts: 4079 Location: Switzerland of Ohio Joined: May 7^th, 2007	Re: 25-20 Singleshot pet loads Reply #13 - Apr 21^st, 2023 at 4:00pm	Print Post
	Original Model 44, .25-20 Stevens, 86 grain bullet, fixed, 6.0 to 6.2 of AA#9, CCI small pistol primer.

	<div class=
	IP Logged

Saratoga Bill Participating Member Offline Posts: 40 Location: Saratoga NY or Crystal River F Joined: Oct 18^th, 2016	Re: 25-20 Singleshot pet loads Reply #14 - Apr 23^rd, 2023 at 4:38pm	Print Post
	8.1 grains of 2400, 115 grain RCBS bullet breach seated


	IP Logged

Page Index Toggle

Pages: [1] 2

‹ Previous Topic | Next Topic ›

« Board Index ‹ Board Top

Top

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge

Page completed in 1.2196 seconds.