ASSRA Forum › General › Gunsmithing Single Shot Rifles › Clerke single shot disassemble
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Clerke single shot disassemble (Read 373 times)
GWarden
Senior Forum Member
****
Offline



Posts: 317
Location: Marshalltown   Iowa
Joined: Apr 18th, 2004
Clerke single shot disassemble
Jan 21st, 2023 at 6:04pm
Print Post  
Is the taking a Clerke single shot pretty much follow the same procedure as the original Win hi wall? Have one on the way (32/40), and want to make sure I do things correctly when disassembling. Thanks for assistance.
Bob
Iowa
  
Game Warden: what boys dream of being and old men wish they could have been
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10624
Joined: Apr 8th, 2009
Re: Clerke single shot disassemble
Reply #1 - Jan 21st, 2023 at 6:21pm
Print Post  
I do not unfortunately but the best advise that I can give would be to take several pictures of every step of your first dissembling..
And if having the ability to take a video of all of it would probably actually be all the more helpful. 
Also I would also do a search on YouTube as allot of folks just do not come onto this site.
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
GWarden
Senior Forum Member
****
Offline



Posts: 317
Location: Marshalltown   Iowa
Joined: Apr 18th, 2004
Re: Clerke single shot disassemble
Reply #2 - Jan 21st, 2023 at 8:18pm
Print Post  
John
Been looking on YouTube and just about turned over every leaf in the woods trying to find info, so far nothing. 
bob
  
Game Warden: what boys dream of being and old men wish they could have been
Back to top
 
IP Logged
 
fishoot
Full Member
***
Offline



Posts: 129
Location: Folsom, CA
Joined: Dec 29th, 2011
Re: Clerke single shot disassemble
Reply #3 - Jan 26th, 2023 at 10:35am
Print Post  
I've had the same problem.  I found an incomplete receiver and have been looking for pictures and drawings of the missing parts... to no avail.  Cry
  
Back to top
 
IP Logged
 
JLouis
Frequent Elocutionist
*****
Offline



Posts: 10624
Joined: Apr 8th, 2009
Re: Clerke single shot disassemble
Reply #4 - Jan 26th, 2023 at 12:45pm
Print Post  
Supposedly DeHass had a seven page write up in one of his books. 
Not sure if included any drawings I don't have it.
  
" It Is Better To Now Have Been A Has Been Than A Never Was Or A Wanna Be "
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 1.3338 seconds.