ASSRA Forum › General › General Discussion › Quality Cartridge company brass
(Moderator Group: Moderator)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Quality Cartridge company brass (Read 805 times)
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2278
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Quality Cartridge company brass
Jan 20th, 2023 at 5:28pm
Print Post  
I recently found a bag of 20 pieces of .219 Zipper brass from the Quality Cartridge company.  The price was only $15 so I had to buy them Smiley.

I've never heard of these guys.  Is the quality of their brass any good?

Chris.
  
Back to top
 
IP Logged
 
Chuckster
Frequent Elocutionist
*****
Offline



Posts: 2232
Location: Colorado
Joined: May 15th, 2008
Re: Quality Cartridge company brass
Reply #1 - Jan 20th, 2023 at 11:05pm
Print Post  
Have a couple hundred Quality Cartridge company brass in .32-40.
Used about 60 of them, maybe 20 shots each, breech seated. Seems to work very well, similar to Winchester.
Chuck
  
Back to top
 
IP Logged
 
gunlaker
Frequent Elocutionist
*****
Offline



Posts: 2278
Location: lower mainland, B.C.
Joined: Dec 13th, 2010
Re: Quality Cartridge company brass
Reply #2 - Jan 21st, 2023 at 9:40am
Print Post  
Thanks.  I might try to reform them for my 219 Donaldson Wasp highwall that I haven't shot yet.  Or maybe keep them as is in case I stumble into a highwall in 219 Zipper.

Chris.
  
Back to top
 
IP Logged
 
waterman
Frequent Elocutionist
*****
Offline



Posts: 2837
Location: Behind the Redwood Curtain
Joined: Jun 9th, 2004
Re: Quality Cartridge company brass
Reply #3 - Jan 21st, 2023 at 1:34pm
Print Post  
I bought a couple of boxes of 8.15x46R when it first showed up.  I thought it quite good.  I'd buy from them again.

Just checked on line.  They have 25-20 SS listed, but not in stock.  If they had enough orders, they might do a special run.  ASSRA group order?

Their website says they would be at the 2022 SHOT show, but nothing for 2023.  Are they still in business?
« Last Edit: Jan 21st, 2023 at 1:44pm by waterman »  
Back to top
 
IP Logged
 
oneatatime
Frequent Elocutionist
*****
Offline



Posts: 3879
Location: Rocky Mountains
Joined: Oct 30th, 2011
Re: Quality Cartridge company brass
Reply #4 - Jan 21st, 2023 at 4:32pm
Print Post  
I fireformed a box of these in my Wasp as an experiment. They formed fine but I have the longest version Wasp so they are short. I have annealed and shot them since OK with lead bullets.
  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

ASSRA Forum » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge

Page completed in 0.8898 seconds.